Problem with latch --sticking cable broke --pull broke etc this info can help qet a better answer ---pull broken use pliers and pull on cable --cable broken will need to use a long screwdriver or skinny arm to get by the grill and pop latch or pull release and bang or push down on hood not enough to dent but to jar latch
SOURCE: how to change water pump in 1996 geo metro?
DITTO ON AUTO ZONE...Don't buy a book, have Auto Zone people copy instructions from their data base for free.
SOURCE: THE FIRING ORDER FOR A 1992 GEO METRO
The firing order is 1-3-2, distrubtor rotates counter clockwise. looking at engine from front of vehicle cyl. # 1 will be on your left cyl.# 2 center and cyl.# 3on your right.
SOURCE: Where is hood latch on 99 Geo Tracker
It is in the glove compartment to keep theives from opening the hood and stealing the vehicle or engine parts. Since the vehicle is a Jeep-style convertible, the interior is not secure.
To open the hood do the following (I own a 1997)
open the glove box.
reach up and to the right and you will feel the handle.
Pull handle.
The hood will still look closed, so you have to lift up on the front of the hood and then push the internal release, whioch is in the middle of the front of the hood.
E-mail me w/ any questions @ [email protected]
SOURCE: hood wont open on 1999 dodge durango
The cable has snapped. The easy bit is replacing it, the hard bit is getting the bonnet open to do so. Take it to a good local garage, or even to ford to open the hood, tell them you can't open the hood and say nothing. Let them open the hood for you, and close it slowly, just one click, so it it still latched, then change the cable.
SOURCE: my hood latch cable is broken under the hood. how
same thing has happened to me. How did you get it fixed?
267 views
Usually answered in minutes!
×