Question about 2001 Pontiac Montana
For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.
Posted on Feb 14, 2009
Might be a weak or failing water pump... Does it leak antifreeze or do you have to add antifreeze very often? When the engine gets to operating temperature squeeze the top radiator hose and see if you can feel pressure from the water pump forcing water through it.
Posted on Feb 21, 2009
jack the vehicle up remove the wheel
remove the brake caliper bottom bolt 15mm. lift the caliper up and slide the caliper pin out
remove the caliper housing bracket 2 - 15mm. bolts
remove the brake rotor
remove the drive axle nut 1 5/16
the remove the hub bearing bolts 3- 13mm. they are in behind (best to use a 13mm flex socket)
disconnect the ABS harness
use a hammer and hit the hub bearing flage (it maybe corroded )
now the hub bearing is out clean the steering knuckle with sandpaper to remove corrosion
install the hub bearing (make sure the ABS harness is in the right position)
hope this helps
Posted on Apr 29, 2010
Testimonial: "Thanks for the very useful information. That was all I needed to get the job done."
Tips for a great answer:
Sep 23, 2015 | 2004 Pontiac Montana
Jan 31, 2013 | 2001 Pontiac Montana
Nov 27, 2012 | 2001 Pontiac Montana
Jan 29, 2011 | 2001 Pontiac Montana
Jul 21, 2010 | 2001 Pontiac Montana
Dec 05, 2009 | 2001 Pontiac Montana
Jan 07, 2009 | 2001 Pontiac Montana
82 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: