- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
depending on the fluid, it could be leaking and then evaporating. If possible, you can run the tractor and open the section where the power steering fluid is located and monitor it to see how it leaks. Thank you.
I had the exact same problem with my 7060. It is caused by a switch (relay) that monitors the hydraulic fluid. The switch is under the floorboard on the driver's right side. The tractor will act the same if you have low hydraulic fluid.
Hi Benjamin:
I have a fleet of equipment that have hydraulic components, and one of the most regular maintenance tasks is replacing failed or worn components.
Running hydraulic equipment with leaks present is a real safety hazard as the part could fail resulting in hot high pressure fluid being sprayed unrestrained.
Please, do not run the machine until you replace the defective part.
Hopefully there will be a local hydraulic hose shop that can assist you.
Cheers.
×