SOURCE: '96 ford Crown Victoria....No hazard or brake light no turn sigal
Sounds like the multifunction switch. Try working the hazard switch up and down a few times to see if you get some lights to work. If so then replace the switch.
SOURCE: 1998 ford explorer hazard flassher not working but
It could be your switch on top of the steering colum
SOURCE: My hazard lights work but my blinkers dont in my
Hi there:
Fig. 39: 1995-99 Explorer & Mountaineer body wiring (Zoom Link) Hope this helps; also keep in mind that your feedback
is important and
I`ll appreciate your time and consideration if you leave some
testimonial comment about this answer.
Turn signal lights and hazard lights it is the same flasher; the Flasher is located front seating area, driver side, behind dash, mounted on steering column. Do you have power on the white/red wire at the switch?
I would start with testing the multitunction switch that is more than likely faulty.
Thank you for using FixYa, have a nice day.
SOURCE: 1998 Ford Explorer,left turn signal and hazard lights do not blink, right side works just fine
,I suspect you have a bad flasher, it is usually located in the fuse box or near it. If this was helpful please leave me good feed back
2,201 views
Usually answered in minutes!
×