Need diagram for 1987 85hp Force outborad - Cars & Trucks

Your diagrams are here:
http://www.bbbind.com/tsb-wiring-diagrams-database

check the switches first for continuity when no force applied.

for help u will find a lot of wiring diagrams and circuit diagrams help books and stuff like this at reliable-store
the girl in the chat box can help u instantly... im a frequent buyer there since Im a mechanic so take help from there

Hey Barbara,
get one of these manuals...you will be glad you did.. (professionals use these..they don't know everything)

Force Outboard Manuals by Seloc 1984 1999

Mercury Outboard Manuals by Seloc 1965 2014

Using a belt removal tool or equivalent, you must move the belt tensioner to loosen the belt tension and remove the belt. Using the diagram underhood to re-route the new belt position it on the pulleys as per the diagram, ensuring it is properly seated on all grooved pulleys. Then release the release the force applied to the belt tensioner to re-tighten the new belt. If you don't have a diagram underhood, here is what Autozone says it should be.

go please to www.autoelectronico. com and download for free. this web is spanish . However you can translate the information. I strong recommend you by powerful information update for any models cars.
Try it and fix it for FREE.
God bless you

It depends on which engine you have. but you can get a diagram online from the repair section of most major autopart store web sites.

back the adjuster to the point you can just trun the caliper or the drum with little force. you will hear a little rubbing sound from the brake pad.

Try here it gives all the diagrams of routing

hi,could you posy your engine number,so i could post your inquiry.ty