Question about 2005 Chrysler Pacifica
WHEN YOU OPEN YOUR HOOD LOOK DOWN THE DRIVER SIDE FENDER THEN LOOK LEFT ABOUT 10 INCHS AND YOU SOULD FIND IT IT WILL BE WHITE IN THE ENGINE COMPARTMANT AREA
Posted on Feb 14, 2009
if your garage motor have rolling codes you need to put your car inside garage near the motor leave ignition on go to the motor locate learn button press it then quickly go to the car and press and hold one of the buttons for approximately 30 sec or until it start blinking rapidly, if you have a regular motor take one hand held opener go inside car ignition on same time press open button on handheld remote and on the car button 30 sec and it should be programmed.
Posted on May 18, 2009
I have a 2004 Pacifica and mine is on the drivers side front, underneath between the bumper and the wheel splash guard. You will need to remove the splash guard ti access the PCM. Not very hard at all. Replacement time for a handy DIYer: about 1/2 hour. Good luck!!
Posted on Jun 05, 2010
Tips for a great answer:
Aug 03, 2017 | 2005 Chrysler Pacifica
Jul 03, 2017 | Chrysler Cars & Trucks
May 25, 2017 | 2004 Chrysler Pacifica
Sep 20, 2011 | 2005 Chrysler Pacifica
Jun 21, 2011 | 2005 Chrysler Pacifica
May 12, 2010 | 2005 Chrysler Pacifica
Mar 09, 2010 | 2005 Chrysler Pacifica
Jul 12, 2009 | 2005 Chrysler Pacifica
Mar 12, 2009 | 2004 Chrysler Pacifica
845 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: