At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
these bend valves if belt breaks while running Align the timing marks on the camshaft gears to the notches on the camshaft cover, using the intake gear mark for the intake gear and the exhaust gear mark for the exhaust gear. Align the mark on the crankshaft gear with the notch at the bottom of the rear timing belt cover.
Hi there:First I suggest recharge battery, start car, check voltage across battery should be around 14.5, if not alternators gone. Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
You can bypass both the AC compressor and the middle serpentine idler pulley with a 6PK1790. The middle pulley is bypassed by running the belt straight line from the upper rear serpentine idler straight to the power steering pulley, then over the water pump (the smooth pulley powered by the back side of the belt) and down to the engine drive pulley (harmonic balancer), bypassing the AC compressor) This works fine. On 9.5 models, the same basic idea, but a slightly different sized belt.
×