Cars & Trucks Logo

Related Topics:

Ron Wong Posted on Apr 23, 2018

The oil service light stays on on my kymco myroad 700i. I just did the oil change and I followed the manual to reset the indicator light, but it won't go off. What else do I do?

1 Answer

Clive

Level 1:

An expert who has achieved level 1.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 3 Answers
  • Posted on Dec 01, 2020
Clive
Contributor
Level 1:

An expert who has achieved level 1.

Problem Solver:

An expert who has answered 5 questions.

Joined: Jun 23, 2010
Answers
3
Questions
7
Helped
1679
Points
4

If you kept pushing Mode and ADJ buttons and it won't go off, you may need to use a blunt tip of a pen or e.g. wooden dowel instead, it helps with the contact inside the button, but be careful not to overdo it

5 Related Answers

Anonymous

  • 77 Answers
  • Posted on May 17, 2009

SOURCE: Reset oil change indicator on BMW 525 2006

BMW requires a scan tool to reset the light.

Ad
jagjeffery

Jeffery Lewis

  • 329 Answers
  • Posted on May 28, 2009

SOURCE: BMW528i 1999-How do you reset oil service light after oil change?

With the key in the ignition but in the off postion press and hold your odometer trip button in then turn your key to the first postion hold the trip button in for 5 seconds the display will read oil service or inspection then it will say reset release the button and then press it again untill the reset starts to flash then release and press the button briefly to reset

Anonymous

  • 1077 Answers
  • Posted on May 30, 2009

SOURCE: reset service indicator light

On a 2008, thurn the key to the ACC position. Hold down the reset button for about 10sec on the dash until the whole display starts flashing.
When the whole display is flashing, hold down the reset button again for about 10sec. the OIL LIFE will go to 100%.

Anonymous

  • 190 Answers
  • Posted on Jul 10, 2009

SOURCE: 1999 audi a4 oil reset light

Turn off the ignition press and hold the button on the leftside of the display while turning the ignition on it should say service oil on the display pull out the button on the rightside of the display until the service oil clears

Anonymous

  • 20 Answers
  • Posted on Aug 01, 2009

SOURCE: reset oil service light 318ti 96

You can also take a paper clip (can mess things up, but I use it) And have it touch the 7th & 19th pin inside the service port.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What to do if the oil light stays on even after the oils was changed

The oil reminder has to be reset. You can find it in the owners manual. If you tell me what year, make and model it is I could figure it out for you.
0helpful
2answers

How do i reset my manint req's light after an oil change on a 2003 Honda pilot

Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.
0helpful
1answer

Why does the Change Oil light stay on for 15 extra seconds?

TAKE THE TRUCK BACK TO PEPBOY AND TELL THEM TO RESET THE SERVICE INDICATOR
1helpful
2answers

Hello today i leaded out my Chevy Suburban truck to my sister she returned to me with the Service Engine Soon light on ?? Im sure she ran the truck up hill ? What might the problem be it was perfect this...

She didn't do anything wrong at all. Your truck is just fine and doing what it was designed to do. That's a normal indicator that comes on to remind you to get the oil changed. It's supposed to get reset every time the oil gets changed and frequently, Quickie Lube and other instant oil change shops will overlook resetting it. Look in your owners manual under "Resetting the Service Engine indicator light" and you can reset it yourself. Or just get the oil changed and tell them to make sure and reset it.
3helpful
2answers

Reset change oil light

hello, here is the instructions on how to reset the light

When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A CHANGE ENGINE OIL SOON message will come on. Change the engine oil as soon as possible within the next 600 miles (1000 km). It is possible that, if driving under the best conditions, the oil life may not indicate that an oil change is necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset.
If the system is ever reset accidentally, change the engine oil at 3000 miles (5000 km) since last oil change.
To reset the Engine Oil Life System, do the following:
  1. Turn the ignition to ON, with the engine off.
  2. Slowly fully press and release the accelerator pedal 3 times within 5 seconds.
  3. The reset is complete when the chimes sound and the CHANGE OIL lamp goes out. If the lamp stays on and no chime is heard, repeat the reset procedure.
  4. Turn the key to OFF.
If the CHANGE OIL lamp comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.
0helpful
1answer

How do i reset the oil light on my 95 fleetwood cad

1993 BROUGHAM & 1993-96 FLEETWOOD
Oil Life Indicator
1. Oil life indicator will display CHANGE OIL when oil change is needed, based upon engine oil temperatures and driving patterns. After changing oil, reset
oil life indicator.
2. To reset, turn ignition switch to ON position. Do not start engine. Fully press and release accelerator pedal 3 times within 5 seconds. If CHANGE OIL light
comes on and stays on for 5 seconds, it did not reset. Reset system again.
0helpful
1answer

Change engine oil light is on. Occassional goes out while driving. Start up and at idle the light stay's on? I'm thinking it may be the oil sending unit? Don't really know? Your suggestions? And the...

If it says "change engine oil" then its just a service light.Check your oil level and oil pressure and reset the service indicator[No Buicks in Ireland so i dont know how to reset it Sorry]
5helpful
3answers

2006 ford exsplorer oil light did not go off after a oil change.

In the owners manual, you will find reset procedures.

I found this for ya, hope it helps!

Please Rate!

Oil Change Reset
A press of the OIL CHANGE RESET switch will allow you to
reset the oil life feature to 100% (or your Personalized Oil Reset
Percentage). After you have the oil changed, you must execute
the following procedure. Press the OIL CHANGE RESET switch
and hold for five seconds as the M/C counts down for five
seconds. After a successful reset the Message Center will display
“OIL LIFE RESET TO 100%.” If you have established a
Personalized Oil Reset Percentage, the display will show that
percentage instead of 100%. To ensure accurate oil life
indicators, perform this reset procedure only after an oil change.
Your Personalized Oil Reset Percentage allows you to establish a
smaller oil change interval than the manufacturer’s
recommended interval. To establish your Personalized Oil Reset
Percentage perform the following procedure:
1. Press and hold the OIL CHANGE RESET switch and press
the RESET switch while the display is still counting down
the 5 seconds to reset. The display will change to “START
OIL LIFE AT XXX%.”
2. Press the OIL CHANGE RESET switch until the displayed
percentage is the Personalized Oil Reset Percentage that you
desire. Your choices are 100%, 90%, 80%, 70%, 60%, 50%,
40% and 30%.
2helpful
1answer

1999 Pontiac Grand Prix lights are staying on

what is the procedure you are using can you explain it to me?
Resetting Procedure

To reset the CHANGE OIL SOON indicator if equipped with the Driver Information Center (DIC).

  1. Turn the ignition to ON without starting the engine.
  2. Fully press and release the accelerator pedal three times within five seconds.
    • If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the ignition key to OFF then start the vehicle.
    • If the CHANGE OIL SOON indicator comes on and stays on, repeat the procedure.
To reset the OIL LIFE indicator if equipped with a Trip Computer.

  1. Press the trip MODE button until the light appears next to OIL LIFE.
  2. Press and hold the trip RESET button until the oil life percentage changes to 100%.
Hope this helps Ill look into the ABS lights but I do believe that you will need a scan tool to retreive a code to be able to diagnose the reason for the lights



Not finding what you are looking for?

220 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...