Question about 2004 Chrysler Sebring
Sounds like a short in the wiring or fuse panel. As new as it is, I would suggest a mechanic as troubleshooting wiring in newer cars is not only difficult, but also dangerous. Many a shade-tree mechanic has set off the airbags that way!
Posted on Apr 14, 2009
Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove
Posted on Jan 03, 2010
why do you want your rpms higher while idling? you don't want them high because your gas bill will reflect that. slow shouldn't matter but if it's dying while on idle it could either be your mass air flow sensor or your fuel filter being clogged
Posted on Mar 23, 2010
Some of the Sebrings have two filters(one is called a sock).The sock(which all sebrings have) is located in the fuel tank itself on the pump module.If this model is the JXI then the external filter is located on the belly of the car between the tank and drivers rear seat. I hope I could help!!!
Posted on Apr 29, 2010
Tips for a great answer:
Jun 01, 2018 | Chrysler Cars & Trucks
Feb 02, 2017 | 2004 Chrysler Sebring
Feb 15, 2016 | Chrysler Cars & Trucks
Jun 02, 2011 | 2003 Chrysler Sebring
Apr 29, 2010 | 2004 Chrysler Sebring
Jan 30, 2009 | 2004 Chrysler Sebring
Jul 03, 2017 | 2004 Chrysler Sebring
313 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: