Question about 1997 Cadillac DeVille
hi im wesall o2 sensors are located in the exaust system yours has one before the converter one after if it has duall exaust before the cat on drivers side will be upstream sensor bank 1 after cat right side will be bank 2 sensor 2
ps please rate me
Posted on Mar 28, 2009
Hello mrsalbert, my name is JShreader. Thank you for choosing fixya.com
Depending on which oxygen sensor you are looking for...there are several of them throughout the Exhaust System. I will start out by giving you a brief description of what and oxygen sensor is, and they're general purpose.
Four Heated Oxygen Sensors (HO2S) are mounted in the exhaust system where they monitor the oxygen content in the exhaust stream. There is an oxygen sensor mounted in each exhaust manifold and one on each end of the catalytic converter. the oxygen sensor located in the front exhaust manifold is the Bank 2 Sensor 1 (Front) sensor. The oxygen sensor located in the rear exhaust manifold is the Bank 1 Sensor 1 (Rear) sensor. The oxygen sensor located in the Y-pipe ahead of the catalytic converter is the Bank 1 Sensor 2 (Pre-converter) sensor. The oxygen sensor located in the catalytic converter outlet is the Bank 1 Sensor 3 (Post-converter) sensor.
An oxygen sensor acts like a battery because it creates its own signal voltage once it reaches operating temperature. This voltage is produced when the oxygen content in the exhaust stream is different than the oxygen content in the atmosphere. A lean condition (high oxygen content in exhaust) will produce a low voltage (near 0 volts) and a rich condition (low oxygen content in exhaust) will produce a high voltage (near one volt). The PCM provides a reference signal voltage (0.45 volt) and a ground to the sensor. The PCM reference voltage is necessary because the oxygen sensors do not provide their own voltage until they reach operating temperature.
the oxygen sensors also incorporate a heating element inside of the sensor housing. This heating element is energized with the ignition On and allows the sensors to reach operating temperatures quickly. The PCM can then use oxygen sensor information sooner after engine start-up.
The PCM uses oxygen sensor information during Closed Loop operation to constantly adjust fuel control to reduce exhaust emissions. Because the oxygen sensors provide information sooner after engine start-up, exhaust emissions are reduced. Faulty oxygen sensors will cause various driveability conditions and will set a DTC.
That being said...I uploaded a .pdf for you of pictures showing the locations of ALL the oxygen Sensors on your Vehicle. You can download it by clicking HERE.
I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!
Posted on Apr 01, 2009
Tips for a great answer:
Jan 19, 2016 | 1993 Cadillac DeVille
Mar 25, 2014 | 2000 Cadillac DeVille
Feb 09, 2014 | 2001 Cadillac DeVille
Sep 14, 2010 | 1992 Cadillac DeVille
Mar 15, 2010 | 2004 Cadillac Deville
Feb 13, 2010 | 1991 Cadillac DeVille
Jan 21, 2010 | 1992 Cadillac DeVille
Jul 10, 2009 | 1991 Cadillac DeVille
Mar 28, 2009 | 2001 Cadillac DeVille
Sep 14, 2015 | 1997 Cadillac DeVille
115 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: