Turn key so dash lights come on and leave it like that for one hour then turn to crank engine without switching off.
SOURCE: i have a 1999 nissan maxima with code P1320
This code is a crapshoot. There are two main things it could be and they are both expensive. There could be wire breakage in the engine harness. There is a thick harness coming out of engine bulkhead on the passenger/right side and it has a slight bend to it. With the engine idling grab that bend and give it a couple of twists and yanks. If the engine stumbles or misses that is the source of your troubles. If not, you more than likely need to replace the coils. Any one of the six coils could be causing the code so I recommend replacing all six at the same time. You could buy one coil for the front bank and one for the rear and swap it between cylinders to see which coil is causing the code. This is time consuming but cheaper.
SOURCE: ABS light stays on
that has four wheel anti lock so your gonna need to either take all them off and clean ends it may correct the problem but more than likely your gonna have to take to a large shop that has abs computer to find which sensor is bad then correct the problem
SOURCE: where is the computer located on a 1999 nissan maxima SE 3.1L?
its under the radio on the floor. look on the floor right next to the gas pedal. you will see a black side cover. remove the cover and you will see the computer. there is a cover on the passenger side also. right under the glove box next to your left foot if you were sitting in pass. side seat.
105 views
Usually answered in minutes!
×