Question about Nissan Cars & Trucks

Can you please help with torque settings, for Nissan NP 200 1.5 dci diesel

Nissan NP200 1.5 dci with 9K9M engine torque settings for Main brgs, big end Brgs, cylinder head, Flywheel

1 Answer

Kardoc

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.
Nissan Master
6,120 Answers

This link may have some of those torque specs. http://www.championbrands.com/aera-torquespecs.pdf

Posted on Mar 26, 2019

5 Related Answers

Anonymous

SOURCE: Torque spec for flywheel bolt: Isuzu 2.5 diesel engine

normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.

Posted on Aug 15, 2008

Duane Morse

1111 Answers

SOURCE: I need torque settings for 1600 beetle engine SP

wiki this

Posted on Aug 25, 2009

Stanley Kramer

115 Answers

SOURCE: cylinder head torque settings for a toyota 1493cc

If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.

Posted on Sep 04, 2009

Anonymous

1 Answer

SOURCE: I am busy with an

timing marks

Posted on May 19, 2011

fmkaguru0019

3 Answers

SOURCE: i have a mazda diesel WL 25 engine. i need the

I have a same problem. need help

Posted on Jul 14, 2011

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Need torque settings for mains and bigends for Audi 500s 5 cyl 2,3lit

big ends 30nm or 22 ftlbs then tighten futher by 1/4 turn or 90degrees.
main brgs, 65nm or 48ftlbs.

Sep 13, 2017 | Audi Cars & Trucks

1 Answer

2010 Nissan np 200 1.5 dci acceleration problem, struggle to exceed 120km p/hour. Please help

Is the exhaust sound very quiet at the tail pipe?
If so,the exhaust system may be plugged and restricting exhaust flow.
If exhaust is OK,check the fuel filter.

Apr 24, 2017 | Nissan Cars & Trucks

1 Answer

I need the torque specs for flywheel bolts on a Nissan NP 200 bakkie. It has a Renault K7M engine - 1600 cc

you will need the torque specifications for the renault engine not nissan
the bolts may be different sizes and incorrect torque readings may snap off the bolts

Dec 17, 2016 | Nissan Cars & Trucks

1 Answer

I cannot find the oil filter on my 2015 Nissan Navara NP 300 diesel 2.5 litre. Where do I look please?

check front side of engine block under intake manifold. opposite side to exhaust. if its not a standard type metal filter, it can be a plastic type which is located under a big plastic nut.about the size of your palm. it states tightening torque on it. be very careful not to damage thread on big nut.
good luck

Jul 06, 2016 | Nissan Cars & Trucks

1 Answer

What are the torque settings for big end bearings?

that might make it a D40
cant find the engine repair manual on the net
can only give you links

http://diyservicemanuals.com/nissan-navara-service-repair-manuals

Download Nissan

http://www.manualdownload.co/ccp0-prodshow/nissan-YD22DDTi-diesel-engine-repair-manual.html

Jun 30, 2016 | 2007 Nissan Navara 2.5

1 Answer

I have a Nissan NP 200 1.5 Dci that will not start with the starter being cranked, but will start when kick started.

Has the ignition switch been tested? It is a known problem that the switch drops out the ignition circuit power during cranking, result is a crank and no start. The switch is what is turned by the ignition key cylinder.

Jun 16, 2016 | Nissan Cars & Trucks

1 Answer