Question about Hyundai Cars & Trucks
what u do is go to your local auto supply store and buy throttlebody cleaner you remove the rubber hose from the throttle body with the engine off of course u open the throttle and spray cleaner in it then use a tooth brush inside it replace the hose done
except it will be hard to start the first time crank engine over with foot to the floor on the gas pedal do not pump it
Posted on Oct 19, 2008
unless you can discover what DTC (Diagnostic Trouble Code) has been recorded/set in the control module, it's anyone's guess.
Posted on Sep 10, 2009
Did you use a aftermarket O2 sensor or a genuine Hyundai one? If it's an aftermarket one it may be bad or not as good as the OEM one. See here for more details and other potential causes: P0133
Posted on Feb 11, 2010
P2626 O2 Sensor Pumping Current Trim Circuit/Open (Bank 1 Sensor 1)
I'll sure this has to do with a faulty O2 sensor. This sensor is usually located around the header of your car, or down more on your exhaust.
Try disconnecting your battery for 30 mins, hook it back up, and start your car again. This will erase the error. See if it comes in again.
Hope this help (remember rated this post).
Posted on Mar 25, 2010
Tips for a great answer:
Oct 17, 2016 | 2003 Hyundai Elantra GLS
Sep 24, 2014 | 2011 Hyundai Elantra GLS
Mar 18, 2014 | Hyundai Motor 2002 Elantra
Jul 24, 2011 | 2011 Hyundai Elantra Touring
May 21, 2010 | Hyundai Motor 2003 Elantra
Oct 07, 2008 | Hyundai Motor 2002 Elantra
29 people viewed this question
Usually answered in minutes!