Question about 2001 Ford Taurus
First you need a lot of tools second you have to disconnect the transmission drive axles and remove the transmission from the vehicle jack stands engine crane slide hammer with puller arm attachment why do you think the pump went?
Posted on Nov 22, 2019
2001 Ford Taurus V6-3.0L DOHC VIN S
Fuel Pump: Service and Repair
1. Remove the fuel tank.
2. Clean the area around the fuel pump mounting flange.
3. Using the special tool, remove the fuel module retaining ring.(Screwdriver and hammer)
4. Remove the fuel delivery module from the fuel tank.
CAUTION: The fuel delivery module must be handled carefully to avoid damage to the float arm, filter, and convolute hoses.
1. To install, reverse the removal procedure.
NOTE: A stop should be felt when aligning the raised arrow on top of the fuel tank delivery module to the dot on the fuel tank.
Posted on Sep 08, 2009
Testimonial: "Very helpfull, except i think I installed it wrong because its doing the same thing, Fuel gauge is not working properly, I did not notice any arrows o"
This is for a 3.0L and VIN S engine--
VIN U Engine
NOTE The water pump bolts are of different lengths and must be installed in the correct locations.
Posted on Dec 08, 2009
A good place to start is a ford dealer. Often they can cut you a key off the VIN number. You will have to go there in person., and some kind of proof of ownership would be needed!
Posted on Apr 02, 2010
Tips for a great answer:
Aug 06, 2015 | 2004 Ford Taurus
Oct 14, 2011 | 2001 Ford Taurus
Apr 09, 2011 | 2001 Ford Taurus
Mar 07, 2011 | 2001 Ford Taurus
Jan 25, 2011 | 2001 Ford Taurus
Feb 09, 2010 | 2001 Ford Taurus
Dec 01, 2009 | 2001 Ford Taurus
Oct 09, 2009 | 2001 Ford Taurus
206 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: