It is limited trim with navigation.The car is American spec but i have imported it, so I want the measurements to be in metric system. Thanks
Yes, go into your general settings in your radio display and one of the things you can change is the units.
SOURCE: change mileage and temperature from english to metric
Look to see if you have an Info Centre on your dash. If you do push the Info button until mileage comes up and click Reset it should change from english to metric. Changing the temp is done the same way. If you have an owners manual it will tell you how to do it as well. Hope this helps
SOURCE: Climate controls are now in Celsius. HELP
On your DIC (driver information center) to the left you will see 3 buttons arranged vertically.
The ENG/MET button is used to switch between english and metric. Push that button until all displays are in english, that should return your climate control to fahrenheit.
Once you have completed that, push and hold the "reset" button down for 2 seconds ( button just below the ENG/MET button). That should reset you DIC to the default brightness as well as your other displays.
Give it a try and let me know.
Regards,
hold the 2 buttons at the same timr Vitally
SOURCE: change climate control from celsius to Fahrenheit
turn the key so everything is working but the car isn't started. then push and hold the little black button that resets the odo. while holding the button turn the key all the way back to the off. next time you start the car it should switch back to F.
SOURCE: how can i change the
Click the top left button on the steering wheel (looks like a book page) toggle the display (display is right under the temp and gas gauge on the left of dash). Go to Units and change between U.S. And metric to toggle from farentheight to Celsius an visa versa. It also changes between miles and kilometers, gallons / kilograms, etc.
I hope that helps - it took me a minute to figure this out.
If your temperature reads in climate control reads in degrees Celsius "C" instead of Fahrenheit "F", follow these steps to change to Fahrenheit.
The display should then change to "F". Follow these same steps to change your read-out to Celsius , if preferred.
1,423 views
Usually answered in minutes!
×