1998 volvo can't get word CODE to appear - Volvo Cars & Trucks

go to dealer

Hi the 1998 Volvo Have OBD II and require a code reader to to read and erase code which resets the service engine soon light if you go to AutoZone they will reset it for you for free.
Have a good night.

i would first pull the radio out and see if it is written on the side/top (you would be surprised how many times this is the case). If that does not work, leave you key in the first position for 2 hours (might want to also hook your car up to a battery charger while your doing this) and the code should appear on the screen... if neither work, go to you local volvo dealer, they should be able to get the code for you... note: once you get the code, write it down somewhere obvious in the car so you don't forget it!

Keep the ignition in position 1 and the radio on until code appears on the radio, then enter code.

Look in your owners manual usually there is a little card that has the code in there or in the booklet. Otherwise you will have to go to the dealer for the code.

look in glove compent

It only takes 2 hours with the car not running and the key in the on position so all the lights light up

your going to have to call up your local volvo dealer and give them your vin number and they can look it up for you. You can try using radio-code.com but i wouldnt recomend it. Your best bet is calling your local volvo dealer and they will help you out.

call volvo and give them the vin number. they should give you the code.

what is the radio code for 1998 vovlo s70