SOURCE: Broken inside door handle-1996 Chevy Silverado Extended Cab
On almost all GM's there will be a screw in the recess that the handle sits in. After removing this screw, gently wiggle this cup out of it's hole and there should be a metal rod attached to the back of it with a small clip. Unclip this and it's out - installation is the reverse. Just don't lose the clip or let the linkage rod fall down inside or you will have to remove the door panel. It shouldn't take five minutes to replace and most parts stores now carry GM door handle assemblies. Good Luck!
SOURCE: back door on 2002 sienna is broke ,how do I open?
search internet for this topic. there are many solutions on web. I did mine, but don't remember all the detail steps to tell you.
SOURCE: Driver door handle of 2000 handle broken in half
FIRST YOU NEED TO REMOVE THE INSIDE PANEL. AFTER DOING THAT, WITH THE WINDOW ROLLED UP REMOVE 2 PLUGS ON THE METAL TO ACCESS THE TWO NUTS THAT HOLD ON THE OUTSIDE HANDLE. WHEN REMOVED, YOU CAN UNHOOK THE RODS THAT ACTUATE THE DOOR RELEASE. THE INSTALLATION IS THE REVERSE. I HOPE THIS HELPS. PLEASE FEEL FREE TO KEEP ME POSTED. THANKS FOR USING FIX-YA. ANY OTHER QUESTIONS, JUST ASK. GOOD LUCK
SOURCE: How to install a pontiac G6 driver door handle
Yeah, you have to remove the lock. Use an impact drill with the right phillips head to remove the screws. if you try to take them out with a screw driver, you will strip them. Remember...impact drill.
233 views
Usually answered in minutes!
×