Check hoses at firewall carefully both should be relatively hot when engine at operating temp. If system is working correctly inside the output while be colder than input hose. If both cold replace thermostat. If not it may be a temperature control actuator, which may mean a visit to a repair shop depending on its location. Finally check all fuses related to climate control.
SOURCE: New Dodge Journey 2011 Where would
I just changed the battery in my fob for 2011 Journey Crew, with the battery removed ( from fob ) I did start my car by pushing the start button whith my fob... so the theory is tested and true.... also the battery you'll need is CR2032 available everywhere... and removing the battery will NOT remove the programming of your fob ( also tested )... so no need to visit the "steelership" Hope this helps....
SOURCE: can you straight swap a 2009 2.4l dodge journey
the block maybe the same but not the sensors or intake and manifold, they must be swapped
SOURCE: Trying to locate the crank position sensor on a 2011 Dodge Journey 2.4L
located underneath the starter.
http://i.fixya.net/uploads/images/2_4_2012_12_06_11_am.gif
SOURCE: where is the thermostat located in a 2010 dodge journey. and how can I replace it
Where radiator hose connects to engine. Can b hot..wear gloves n glasses or bring to autoparts store..they help
228 views
Usually answered in minutes!
×