SOURCE: broken wire in drivers door for power windows
Yes. You can remove the inside door panel fairly easily. There should be several (2-6) plastic covers or cap (behind door handle, where the door is covered with the dash, as well as other hiding spots). Remove these cap and the screws/bolts behind them. After you have found and removed all of the screws/bolts you should be able to lift up and the door panel and remove it. it may be a little tough, but DO NOT force it, you may have missed one of the screw/bolts, look again. When you get the door panel off, be careful that you don't rip the wires from your electric controls (pwr windows/locks).
SOURCE: the drivers door hinge pins are loose allow the
Some local auto parts have replacement door/hinge pin-kits for Ford products. (If not order from your local Ford dealer) The pins may need heated with a torch and driven out with a long spline pin punch. You might want to get a mechanic to do this for you.
SOURCE: what is the drivers side hinge pillar panel
The windshield metal post from the roof to the bottom
of the door sill is called an A -pillar
That is what your door hinges are bolted to
The metal to your right as you enter the vehicle is
called the B-pillar
That is the one with the drivers door catch
The roof down to the door sill on the rear door of a car
or rear window downward is called a C-pillar
You may hear those terms if you watch a NASCAR race
The door sills are the metal sometimes covered with plastic
you swing your feet over to get in at the bottom between A & B
pillar
You may see rubber or some type covering just past the hinges
as you look into the front fenders
Inside next to the driver or passengers feet ,on the inside,
are what is called kick panels,inside sheet metal on A Pillars
50 views
Usually answered in minutes!
×