Question about Ford Cars & Trucks

1 Answer

I have a 1997 Ford expedition Eddie Bauer edition that is vibrating when accelerating to a certain speed

The vibrating doesn't start until I accelerating to about 40 or 45 mph and keeps vibrating until it reaches around 70mph.it accelerates fine,there isn't any pulling anywhere that I can tell the only thing that other than the vibrating is the engine started making a slightly different sound when accelerating and when its idling but the sound is barely noticeable

Posted by Andrew Boone on

Ad

1 Answer

Russ Hill

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,057 Answers

Could be a engine mount, any engine setting out of line will add more load to the engine mount movement, air leak in manifold, bad spark. it could als be something as simple as a thrown wheel balance or the balance on drive shaft balancer is out of sync, or missing.

Posted on Dec 28, 2017

Ad

5 Related Answers

Mike

  • 4372 Answers

SOURCE: From a stand still if you accelerate hard vehicle starts vibra

Well, kind of short on description, issues typical in this complaint are misfiring and U joints.

To emininate the engine, does the vibration happen on power braking, without the vehicle moving?

Posted on May 24, 2010

Ad
jbeska

john beska

  • 130 Answers

SOURCE: my windshield wiper fluid tank

bottlr/hose could be cracked

Posted on Dec 05, 2010

ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: my car is For 2005 Ford Expedition Eddie Bauer

Its possible that you need any valve adjust? Check it and tell us news.

Posted on Jan 14, 2011

Anonymous

SOURCE: I have a 2000 Ford Expedition (Eddie Bauer), 5.4

You should change trans & power steering fluids
every 30,000 miles on all vehicles,if you don't from
when the vehicle was new,you will have problems

Changing the trans fluid only restores the heat removal
properties,it does not fix a single thing, at all

The shift stratagy is determined by several things

Check that the TPS Sensor is working without worn
spots inside it.

No adjustments to make

You could have the sensors checked with a scanner
while driving it.

You have a delayed 1-2 shift

The are servos that apply bands etc,I think
in the end you will be pulling the trans to rebuild
it,as you will be chasing several possibilities, that I
believe will be hardened internal seals from time,
wear & mostly heat

You didn't mention mileage or other past issues
with the trans etc or if your the second owner
etc

They don't normally go 11 years

Posted on Jun 23, 2011

taran_2005

taran_2005

  • 10515 Answers

SOURCE: 1997 Ford expedition Eddie Bauer edition- sun roof

Hi,

I am sorry for the trouble.

This is a common problem. If you look at the reviews for this car, you would be surprised to know how many people are already faced the same issue. Unfortunately, there is no recall or lawsuit for the same.It would be tough to predict what might be the problem as there could be certain fuses and components that could cause this.

However, as you mentioned you could hear the ' hum ' or ' click ' noise, it tells us that the power is up there. If all other functions such power windows, rear vent windows and running board lights are fine, i would suspect the motor. However, if you want to make sure whether it's motor or not, you need to remove the colored trim ring around the opening of the moon roof on the headliner from the inside of the truck. You need to slightly pull down the back edge on the opening in the headliner and you could put a flash in there.If you have a rear DVD player, you need to remove it. Open the DVD screen and you could see 4 screws out there and you could gain access to the motor of the roof. The motor would have allen wrench hole around the center and that would help you to manually move the roof. You need to use the 5/32 allen wrench to turn the motor. Watch the glass and make sure that you are moving it open. You need to move the glass 1 - 2 inches and then see, if that operates the switch. If it does, then the motor is bad.If you use the allen wrench on the motor and try to move the glass and it does not move at all then the track is broken and the whole track has to be replaced.

Let me know,once done.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Aug 14, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need oil filter size for a 2000 ford expedition, eddie bower edition


First, it's an Eddie Bauer Edition (says so right on your truck).
Second, if you call ANY auto parts store, they will look it up for you, and probably even sell you one! (If they couldn't find it before, maybe it's because you misspelled Bauer!) ;)

Jul 21, 2014 | Cars & Trucks

2 Answers

1998 Ford Expedition Eddie Bauer SERVICE ENGINE SOON light


Take the vehicle to any local auto parts store that will read the codes. WRITE THEM DOWN, and report back here for further help.

Dec 21, 2009 | 1998 Ford Expedition

1 Answer

Location of Shift Solenoid in 1999 Ford Expedition Eddie Bauer?


They are round "cans" with wires attached. You should have SSA, SSB, SSC, Torque converter and Pressure Control solenoids. They control pressures and have no mechanical linkage.

Oct 17, 2009 | 1998 Ford Expedition

1 Answer

I got a 1997 Ford Expedition, Eddie Bauer Edition. I got a vibration when I start off. It just vibrates, seems to be coming from the rear. The tranny seems fine, changes gears right and engine is ok. Could...


could be your drive shaft slip yoke needs to be cleaned & lubed. It binds on take off instead of sliding on the trans output haft. Other possibility is u-joints.

Jun 06, 2009 | 2004 Ford F150

1 Answer

New starter and battery and still won't start


Could be voltage regulator or starter relay has also gone bad. Seems to be fairly common in the Bauer editions.

May 22, 2009 | 2000 Ford Expedition

1 Answer

Vibrating noise coming from either the engine or underneath


When the constant velocity joints are worn out. this is what u ussually get.

car vibrates if one or both are worn out. and vibration will increase as speed increases.

car will make a popping or tapping or clicking sound when steering.

Or they might just need lubrication too.
CONSTANT VELOCITY JOINTS ARE LOCATED JUST UNDER THE SHOCKS.....IT LOOKS LIKE A WORM LIKE PLASTIC COVERING A SHAFT.


hope this helps XD

May 13, 2009 | 1997 Ford Explorer AWD

1 Answer

1997 Ford Expedition, 5.4, Eddie Bauer, 4x4, dash indicates 4wd Low range. 4wd not ingaged or intended to be. Acceleration acts as if 4wd is engaged.


5.4 litre petrol ??? recycle it and get a nice little europeon model with a small engine and save the planet

Jan 15, 2009 | 2001 Ford Expedition

2 Answers

Diagram bypass heater cord on 2001 ford expedition eddie bauer


the heater bypass is quite simple, if you look at the firewall you will see two medium sized coolant lines, remove them from the firewall and link them together using a proper sized tube, you can purchase a kit at a parts store quite cheaply

Sep 12, 2008 | 2001 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...