SOURCE: 1996 VW polo diesel fuel pump
easy to change its on top of the injector pump ,but you may have a antitheft shroud around it which means removing the pump from the engine to get get the shroud off
SOURCE: How do I change the alternator in my vw polo p reg
Alternator belt routing — all except VR6, with power steering, no A/C
SOURCE: MISFIRING ON CYLINDER 1 VW POLO 1.4 3CYLINDER
I have changed a few cylinder heads under warranty for this type of problem. The exhaust valve guides wear, this causes the exhaust valve to seat badly, giving low compression. if one cylinder compresion reading is more than about 50 psi below the others, then this warrants head removal. It is quite a job, due to the fact that the camshft id chain driven. If you are up for it then once the head is removed, poor liquid into the exhaust ports and see if it leaks out through any of the exhaust valves.
SOURCE: VW Polo Classic, fuel efficiency problem
Has the car been serviced recently?
If not I would suggest getting it done.Not sure if you have diesel or petrol, but oil can thicken causing more load on the motor and airfilters get blocked and can cause a rich fuel mixture.
If petrol you can take out the plugs to check if they are a light brown colour, if very dark or black you need to check and adjust carb/injection settings/filter.Need to know what engine it is really.
SOURCE: 99 vw passat sw 1.8t #3 cyl not firing.
ihad the same problem.. its not the coils or anything like that.. and any reg mechanic wont know the prob unless they under vw.. u need to replace ur power output stage.. thats what cylinder 3 misfire is.. after i fixed it my car is good as new. i
58 views
Usually answered in minutes!
×