Ok NOW FOR SOMETHING YOUR LOCAL MECHANIC WILL NOT TELL YOU..... I'm going to instruct you how to read engine codes on a Chrysler product.... follow these steps Do not turn the key all the way back to off but also do not go to start ,
***** NOTE SOME NEWER ACTUALLY SHOW NUMBERS IN THE ODOMETER AREA OR RADIO
SOURCE: 2004 SEBRING PUT USED MOTOR CRANKS BUT NO START
try seeing if the coil works here is how to see take a spark plug out and leave the wire connected place it on a metal part of the motor crank it over and have someone watch closely and see if the plugs spark on the metal if they don't then it needs a coil and/or coil wire replace just the coil wire first since that is the least expensive option if that does not solve it then change out the coil and dont hold or touch the coil wire when turning it over cause if it works it hurts like heck
SOURCE: 2004 dakota won't start
sounds like a crankshaft position sensor..fairly common problem on these 3.7 engines..check for fault codes in engine controller..can mbe hard to get out of engine block..seize in..sometimes have to come out in pieces..it is located on passenger side rear of engine..1 bolt holds it in..3 wire connector..below exhaust manifold in side of block..fairly inexpensive part..recommend dealer part
103 views
Usually answered in minutes!
×