Question about 2005 Chrysler Pacifica
well lets not start with visegips .
the lever needs to be removed by removing the screw and removing the lever.
go to the dealer to get the new lever and put it on.
Posted on Jun 12, 2009
I just bought a 2005 Nissan Altima that had the same problem. The motor was fine. I opened the switch and found that a trace on the small circuit board was cut/missing. I soldered it on the spot and it solved the problem. You can access the switch by carefully prying off the switch buttons, then the plate. There are two screws that must be removed so that you can pull the switch assembly out of the seat.
Posted on Aug 02, 2009
I paid $18 at the dealer for just the knob. Then I found it online here for $4.70
Posted on Oct 14, 2009
Tips for a great answer:
DTC B1546, Seat Stow Switch 2 Circuit
DTC B3729 Seat Recline Control Switch
DTC B1735 Seat Front Up Switch Circuit
DTC B1740 Seat Front Down Switch Circuit
DTC B1745 Seat Rear Up Switch Circuit
DTC B1750 Seat Rear Down Switch Circuit
DTC B1755 Seat Assembly Horizontal Forward Switch Circuit
DTC B1760 Seat Assembly Horizontal Rearward Switch Circuit
DTC B1815 Seat Recline Forward Switch Circuit
DTC B1820 Seat Recline Rearward Switch Circuit
Just from looking at the factory service info , I'd say you would be bet off just taking this to the dealer !
The first plase
May 28, 2016 | 2005 Cadillac SRX
Nov 21, 2015 | 2005 Nissan X-Trail 2.5i
Apr 27, 2014 | BMW Cars & Trucks
Jul 12, 2013 | Cars & Trucks
Oct 19, 2012 | 2005 Toyota Avalon
Apr 16, 2012 | 2006 Chrysler Pacifica
Oct 06, 2008 | 2005 Chrysler Pacifica
92 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: