Here is the programming instructions:
https://www.autopartsandremotes.com/product/keyless-entry-remote-cwtwb1u212/
SOURCE: Toyota Land cruiser VX 100 lost the remote control keys.
well the technician must not have realized that your particular key has a chip in it. and it will not run without it. it will unlock doors and turn on ignition but will not tart the car... get your money back from the tech and go to the dealership... I know it sucks and youll probably have to spend around 200 dollars per key. I feel your pain cause i had to do the same. gl to you.
SOURCE: Need programming instructions for RKE for 2000 Mazda 626
2000 Mazda 626
Note: Make SURE the battery is new.
Instructions for programming ONE keyless remote fob.
1. Open the driver’s door & leave open.
2. Insert the key in the ignition.
3. Turn the key to the on and off position 3 times.
4. Remove the key from the ignition.
5. After door open chime stops, press the door open button 3 times.
6. After chime, press any fob key twice.
7. After second chime, press any fob key twice again.
8. After third chime, press any fob key twice again.
9. Press the door open button once.
10. The car should give another acknowledgement chime.
11. Test key fob.
This DOES work. I just programmed mine successfully today, three hours ago.
SOURCE: lost the remote for 2004 Ford Escape, need to disable the alarm
try disconnecting the battery cables from the battery for up to a half hour and then reconnect them. im not sure if this will work for you but i have seen it work on some other vehicles, it couldnt hurt to try... hope this does it for ya
SOURCE: how do I program remote to unlock the doors of 2002 ford taurus?
Come on chat wherein you can stand close to the car while I guide you.
I am Murphybanton.
I am online now.
SOURCE: Bought a 91 Cadillac Deville and it has remote
sorry but the only way is to take it to the dealer
Sit in the driver's seat of your Ford 500.
Insert the key in the ignition and turn it from "Off" to "Run" eight times within 10 seconds. The final turn should have the key in the "Run" position. You will hear the door locks engage; this means it is in programming mode.
Press any button on the remote; the door locks will engage again to confirm the programming. This must be done within 20 seconds of entering the programming mode.
Press any button on the second remote; the door locks will engage again to confirm the programming. This must be done within 20 seconds of entering the programming mode.
Turn the key to the "Off" position to complete the programming. The door locks will engage again confirming that programming is complete.
Decide on a series of five digits to be your personal code. Your code needs to be an easily remembered series or numbers.
Locate the keypad on the driver's door; it will be directly above the driver's door handle.
Press the buttons that correspond with the factory remote keyless entry (RKE) code. This code can be obtained from the dealership if it has been lost.
Activate the programming mode by pressing the "1'2" button within 5 seconds of entering the RKE code.
Delete the old code by pressing and holding the "1'2" button for two seconds.
Enter the new five-digit code that you created in Step 1. This must be done within five seconds of deleting the old code. The door locks will cycle when the new code is confirmed.
hope this helps you.
Hope this helps
253 views
Usually answered in minutes!
×