2008 Chrysler Sebring Convertible power seat stopped moving forward. I had the seat moved all the way back. Switch still allows seat to go up and down and also tilt. Is the switch the problem?

Question edited for clarity.
Question moved from Spanish car company Seat (pronounced See-At).

It must be the motors or a track issue. The seats are a problem.

https://www.google.com/search?q=2008+chrysler+sebring+2.4+power+seat+problems

..

Question edited to add maker.
Question moved from MISC to model category.

Unfortunately no one knows what a 'panel pivot sensor' is.

https://www.google.com/search?q=2008+Sebring+Touring+Convertible.+Location+of+%22panel+pivot+sensor%22

There is some convertible in this link

https://www.google.com/search?q=2008+Sebring+Touring+Convertible.+Location+of+panel+pivot+sensor

....

Question edited for clarity.
Question moved to model category.

Lots of help.

2010 sebring touring convertible top malfunction

Chrysler Forum https://www.chryslerforum.com > new-member-area-5
Jul 14, 2020 - They work on them all day every day and will have a lot more experience than any dealer ever will. Also, go over to the Chrysler Sebring Convertible Club ...
2010 Seabring convertible top not opening - Chrysler Forum
Jan 2, 2020
Convertible Top Stuck "Picture" - Chrysler Enthusiast Forums
Nov 25, 2019
2008 Chrysler Sebring Top Not Working
Jun 2, 2017
More results from www.chryslerforum.com

2008 Chrysler Sebring Convertible Top Won't Go Down

CarGurus.ca https://www.cargurus.ca > Discussion-t39700_ds856569
Here is the fix! A weak Folding Top Header Motor, part #68028392AB (or AA also works), located in the frame at the top of the windshield. My dealer ...
12 answers · 17 votes: Guru, I have the EXACT same issue. Did you ever get any help?

you can try out some guide from here reliable-store.com

they also provide live chat feature for instant help and it's very useful

Make sure the bolts that attach the seat to the body are tight. Also the bolts that connect the rails to the seat.

Bad motor in seat

There are many possible causes of this problem on the convertible Sebrings, the most common problems are as follows;

1) The cargo platform in the trunk is in the wrong position which blocks the rear window from folding downward. Ensure that the cargo platform is in the down position before attempting to operate the top.
2) The Hydraulic pump is low on fluid, it is located in the trunk, in the left rear corner, underneath the carpet. Inspect the fluid level in the reservoir.
3) There is an electrical fault in the system.
4) There is physical damage to one of the panel pivots, inspect for panel binding while the top is moving.

A couple questions for you;

When the top stops moving can you still hear the pump running or does it go quiet?

When the top stops moving does the cluster display "convertible top in operation" or "convertible top malfunction" or something else?

Report back with anything you find or if you need further help.

Nate

I’m happy to assist further over the phone at https://www.6ya.com/expert/nathan_cc888cf971f43e78

Look under the back seat to see if there is any oil . Sometimes the hydrolic rams that move the top will leak fluid. If there is oil refill the fluid may help get the top open, but the ram will need to be replaced.

this seat likely has two different motors to operate these functions and the one that slides it back and forth could either have a bad fuse or could be bad. when hitting the button that should operate this function put your ear near the bottom of the seat and listen for any type of noise coming from the motor. if it sounds as if its trying to move your motor is likely seized. if you can spin the motor over manually it may free it up and you could never end up having to replace it.

FOR POWER SEAT SWITCH AND SEAT REMOVAL CLICK THE LINK BELOW:----

Chrysler Sebring Power Seat

http://technoanswers.blogspot.com/2012/12/chrysler-sebring-power-seat.html

-----------

These will help.

Thanks.