I have ply. grand voyager and the door locks are operating by them selves.

SOURCE: Central locking not working, Chrysler Voyager Limited 2005

hi this works on most voyagers disconect the possative terminal on the battery for ten minites excactly then reconnect and happy days your voyager centrol locking should work ok good luck

SOURCE: 2002 Jeep Grand Cherokee electric door locks not operatin

the passenger door switch pack controls all door locks as this is the receiver from the remote you might want to try this and also check connections

SOURCE: 98 Ply Grand Voyager, 1.4K miles with recurring P0305 code.

You say you changed the cap and rotor so I'm assuming the van has a 3.0L? Possible injector problem on cylinder #5, swap injector with cylinder 1 or 3 and see if miss/dtc moves to that cylinder. You also could have a vaccum leak, although they usually won't come and go. Does the vehicle have a consistent miss or do you just have a check engine light?

Testimonial: "Yes I have a 3.0L. I will swap out injector #5 with another cylinder. I can?t find any vacuum leak and was thinking on putting in a new EGR valve. The vehicle seems to have a consistent miss. The check engine light is on again. I started with error code P0300 and P0305. After I replaced the parts listed above the error codes went away, (no check engine light). Next day P0305 came back. "

SOURCE: Needed serpentine belt diagram for a 91 ply. voyager 3.3L engine

Here's a link to the diagram you need...

http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7006

Good luck and please rate this solution. Thanks.

Testimonial: "Looks good."

SOURCE: how do you remove pass rear wheel bearing on 99

there are 4 bolt attaching the hub to the rear axle. remove those bolts and slide the hub bearing out