I know the keys have little immobilizers in them that looks like a pill almost. Try putting the fob next to the key inside the ignition as if it were still attached, and see if that makes a difference, and you can buy new fob shells on ebay for around $5 if you look hard enough
Put some crazy glue at the end of the key but not too much that is going to drip inside the keyhole of the ignition and see if that will glue two broken keys back together and wait 5 minutes and then pull it out you do have to hold the key pushing in so that the glue will work
SOURCE: Immobiliser light flashing and car
Hello, do you know what the locksmith did to get the code on your key? Did anything else flash on the screen when the car would not start. My car is doing the same thing, and my Jaguar dealer is 200 miles away. My screen is showing [Engine Fault, Transmission Fault and DSC Fault]. Any help would be greatly appreciated..
SOURCE: the driver side door lock broke on my 98 jetta door want open
according to my partsman (who has had great advice for many years), you do not have to remove the door panel to replace the door handle which contains the cylinder lock. the handle is released with a screw which you can see when you open the door. you will need a starhead screwdriver or socket. A new handle costs around $40 at a parts store in my area. call around for a locksmith who will re-key your key to the new lock or use the key which comes with the new lock, your choice. i am in dealing with this also
SOURCE: my renault laguna 1999 rt remote key fob wont work?
IF YOU TYPE 1999 RENAULT LAGUNA REPROGRAMME KEY INTO A GOOGLE SEARCH, YOU WILL BE ABLE TO PRINTOFF INSTRUCTIONS TO REPROGRAMME THE KEY TO THE KEY READER.THE IGNITION NEEDS TO BE OFF TO DO THIS
SOURCE: c240 mercedes key wont turn seems locked
I have a 2001 C240 with the same issue. I removed the positive battery cable from the battery and kept it off for 30 seconds then replaced it. Everything was reset and the key worked.
SOURCE: How to I reset my Fiat Stilo key fob so it will
put key in ignition turn to on position and wait for a couple of minutes for code reset to occur.could be battery you have put in is faulty if it has been sitting on shelf for a while
98 views
Usually answered in minutes!
×