SOURCE: Needing to locate the airbag control module '07 caliber
it is located behind the floor shifter in center console..under small piece of carpet
SOURCE: Oil Dipstick tube is broke, Where does it go?
http://carservicemanuals.blogspot.com/2008/06/download-dodge-ram-2005-service-manual.html
SOURCE: need instuctions to change tail/break lights on 07 dodge caliber
popohead, if people thought it was easy, they wouldn't be here asking. Your reply is useless.
To remove the pins, look a them closely. Notice that there's two little notches cut into the cup that holds the pin. Use a flathead on each side to leveredge them out a little. If that doesn't work at all, you can use a pair of pliers to firmly grip the head of the pin and pull straight out. Quick firm pull.
Once the first pin comes out, the second pin should easily come out. At that point, firmly grip your taillight housing, and pull straight back: Don't try to wiggle it out, and don't try to lift it to one side or the other like a trunk or door. Just pull it firmly straight back like you would a dresser drawer.
Once it's out, the little wiring harnesses come out of the taillight housing with about a 1/4 turn, and the bulbs just slide straight out of those.
Good luck!
SOURCE: how to change head light bulbs on a dodge caliber
Park the Dodge Caliber on a flat paved or concrete surface. Turn the steering wheel all the way to the side opposite the headlight you are replacing. In other words, if you are replacing the left headlight, turn the wheel all the way to the right. Apply the parking brake and release the hood latch.
402 views
Usually answered in minutes!
×