Cars & Trucks Logo

Related Topics:

Robert Bullock Posted on Nov 25, 2017

Where is the speed sensor location on my 2001 gmc sierra 2500

5 Related Answers

Anonymous

  • 375 Answers
  • Posted on May 18, 2008

SOURCE: 2007 gmc sierra 2500 IAT sensor

Well, the IAT (Intake Air Temperature) sensor is located on the air intake duct between the filter and the throttle body (Assuming you have the 6L motor). The wires are easily visible at the plug that connects the sensor to the wiring harness. That's the easiest place to access them.

Ad

Anonymous

  • 71 Answers
  • Posted on Nov 22, 2008

SOURCE: mass air sensor and intake air temperature sensor

They are not the same thing but the air temp sensor is made into the mass air sensor

Anonymous

  • 124 Answers
  • Posted on May 06, 2009

SOURCE: where is the 4x4 encoder motor sensor located on my 03 sierra

the encoder motor sensor is inside the encoder motor. the encoder is located at the transfer case. Remove the encoder and by part number 88962315 this is the sensor. you will have to retime the motor after
hope this helps

Anonymous

  • 1 Answer
  • Posted on May 15, 2009

SOURCE: 2003 gmc sierra duramax 2500

Problem with Diesel Fuel System. Gmc 2002 duramax 2500 HD 4x4 will start 

Roger Foster

  • 701 Answers
  • Posted on Jul 07, 2009

SOURCE: where is oil pressure sensor located on 2001 dodge 2500 cummins?

Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to change 02 sensors on 2006 gmc 2500 hd 4 by4

O2 sensors are located before and after catalytic convertors. Unplug sensors and remove with deep socket.
1helpful
1answer

Location of speed sensors on a 1992 GMC Sierra 2500 4x4

You more likely have an internal problem, namely the High-Reverse clutch pack. If the trans is making the 1 - 2 shift, and your Service Engine light is not on then your speed sensors are working. Judging by the age of the vehicle I would guess that the trans has already been rebuilt at least once (most of the overhauls I do occur at about 150,000 kms) and the failure I see most is the sealing rings have scored the direct drum and led to no third and/or reverse, and of course, no third, no fourth. Want a quick and easy check? Pull the trans dipstick and smell the fluid. It likely has a burnt smell to it.
0helpful
1answer
0helpful
1answer
4helpful
1answer

2003 gmc 2500 sierra oil pressure sending unit where is it

zjlimited_589.jpg

Fig. Oil level sensor location on 2002-2005 4.8L, 5.3L, 6.0L

Hope this helps.

0helpful
1answer

Where is the knock sensor on 2000 gmc sierra?

it is located on the side of the engine block just below the head usually on the drivers side.
9helpful
2answers

2001 GMC SIERRA . ABS LIGHT STAYS ON

Wheel speed sensors misadjusted, damaged , or metal shavings and other debree, since they are magnetic can give false readings from one of the wheel circuits. Over sized tires can give of false speed readings as well. there are many other causes including bad relay, control module, e.t.c. It is best to have the proper scan tool to diagnose an ABS problem
0helpful
1answer

Mass air sensor and intake air temperature sensor

They are not the same thing but the air temp sensor is made into the mass air sensor
0helpful
1answer

Fan only works on high 02 gmc hd 2500

There is a resistor attached to the blower box. Replace the blower resistor and this should solve your problem
0helpful
1answer

2007 gmc sierra 2500 IAT sensor

Well, the IAT (Intake Air Temperature) sensor is located on the air intake duct between the filter and the throttle body (Assuming you have the 6L motor). The wires are easily visible at the plug that connects the sensor to the wiring harness. That's the easiest place to access them.
Not finding what you are looking for?

340 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...