What does the number 5 and number 6 fuse look like on a Mazda 3 2006

Question edited for clarity.
Question moved to model category.

Yes, you are correct, disconnecting the fuse box has broken the pairing between the key and the immobilizer system. Did you remove the main connection plugs to the fuse box? My thought is that those connectors have never been removed since the car was built and breaking a remaking the connection, you might have some connections that as not as good as they should be. Pull the connectors again and give them a good spray with electrical contact cleaner (that is NOT WD40). Then reconnect.

There is various ideas on resetting the Immobilizer here.

https://www.google.com/search?q=mazda+miata+immobilizer+system+reset

Or a Mobile Auto Locksmith

https://www.google.com/search?q=mobile+auto+locksmith+near+me

Just for fun, here are the Fuse Box locations and diagrams. They have changed over the years, and as you didn't state the year, here is all of them.

Mazda MX-5 Miata (NA; 1989-1997) fuses

Fuse Box Diagrams https://fuse-box.info > mazda > mazda-mx-5-miata-na...

Here you will find fuse box diagrams of Mazda MX-5 Miata 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, get information about the location of the fuse ...

Mazda MX-5 Miata (ND; 2016-2023) fuses

Fuse Box Diagrams https://fuse-box.info > mazda > mazda-mx-5-miata-nd...

Fuse box diagram (location and assignment of electrical fuses) for Mazda MX-5 Miata (MX5) (ND; 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023).

Try to refer the Mazda 2009 5 User manual Mazda 2009 5 Automobilehttps://manualszoom.com/manuals/automotive/automobile/mazda/mazda-2009-5-automobile.html

that is only a year old
did it come with the owners glove box hand book

look for a pop off plastic cover on the kick panel
and in the engine bay
CX 5 is the same body shape
Mazda CX 5 Electrical Fuses Replacement Guide 2012 To 2016 Model Years...

Mazda Tribute Questions - CarGurus

www.cargurus.com > Questions > Mazda

CarGurus2001 Mazda Tribute 3.0 Wont Start. out shopping one ... 0. Report. rebel54 asked a2005 Mazda Tribute i Maintenance & Repair question about a month ago ...

Tribute won't start - Mazda Forum - Mazda Enthusiast Forums

www.mazdaforum.com > ... > Mazda Vehicles > Mazda Tribute

May 22, 2007 - I have a 2002 Mazda Tribute V6. On Sunday it wouldn't start. ... 2005Tribute won't start! rizakag, Mazda Tribute, 4, 03-27-2006 09:29 AM ...
Why does my fuse in my 2005 mazda tribute keeps blowing ...www.cargurus.com > Questions > Mazda > TributeCarGurusSep 4, 2014 - Why does my fuse in my 2005 mazda tribute keeps blowing when I try to switch gears?Electrical problem - 2004 Mazda Tribute - RepairPalrepairpal.com > Questions > Mazda > Tribute > 2004 Mazda TributeApr 5, 2011 - Electrical problem on 2004 Mazda Tribute ... meter on the battery cable note the battery draw then remove fuses one at a ... 2005 Mazda Tribute.2005 Mazda Tribute, Fuse #3 Blows, No Tail Lightswww.sparkys-answers.com/.../2005-mazda-tribute-fuse-3-blows-no-tail.h...

this could be a issue with corrosion at the fuse box check this and repair if corrosion is present.also identify if there is a leak at the breather hoses or at the air flow meter

Take it to your Mazda Dealer and they will put it on thcomputer and fix it in 5 min.

Most often the main 80 amp fuse is blown - happens when someone slips with a socket extension when trying to remove the battery terminals. Fuse is under the hood, passenger side and here's a diagram: http://www.mellens.net/mazda/Mazda-Miata-1997/fuses.pdf

I pulled fuse 4 from the inside fuse box on the passenger side dashboard, but quickly realized it is for the rear power outlet, not the cigarette lighter outlet. The cigarette lighter outlet is fuse number 6. They are both blue 15A fuses.

I have the exact problem and have my owners manual in front of me. Per the owners manual, the fust for the cigarette lighter is under the glovebox and number 43. The fuse to replace it with is 15A

There are two bolts on the side of the fuse itself. Under the fuse box on each side. Unbolt those and it will come out.