Question about 1998 Volvo S70
Once the engine is really warmed up and you reset the computer the message does not reappear until the engine is cold again. We have replaced the CVP lines, pugs, leads & rota, catylitic converter and O2 sensors (both). Does anyone have a suggestion please. Chris Jones
I would look at all the fuse .You only need one thats got a fine airline crack .And all eath points in the engine bay .
Posted on Nov 16, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Check the B+ cable. If you remove the fuse box cover in the engine compartment (on the drivers side), and you'll see a post with a nut on it, securing a group of red wires. The connector should be a clean copper color. If you take it to a shop, have them perform a voltage drop test on the cable. If it is corroded or burnt, replace that cable!
Posted on Dec 04, 2008
it is on the back side of the roter and yes it is easy to fix and no there is on special tools just undo the two bolts pull it off unpluge it and then put the new one on and have a good day
Posted on Aug 30, 2009
Testimonial: "Direct answer to a direct question. Replaced the paret in 5 mins. Thanks"
SOURCE: 1998 gmc Sierra Engine light
Hi, there are a number of trouble codes associated with the O2 sensors. Some indicate a sensor failure and others indicate a different problem. Can you tell me the trouble code you are getting?
Posted on Jan 14, 2011
SOURCE: I have a 2002 Chevy
Thanks for choosing FixYa and welcome to the site. OK, bank 1 is located on the same side as the number one cylinder. Most times this is the driver's side. Bank 2 is located on the passenger side of the vehicle, which is opposite of the #1 cylinder. Sensor 1 is before the catylitic converter and sensor 2 is always located after. So for your answer, it is located on the passenger's side before the catylitic converter. That is the location of the bank2 sensor 1 O2 sensor.
Posted on Aug 30, 2011
Tips for a great answer:
Mar 17, 2011 | 1998 Volvo S70
Feb 25, 2011 | 1998 Volvo S70
Please see my tip at http://www.fixya.com/cars/r6235876-no_heat_fan_blowing_cold_air . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.
Dec 04, 2010 | 1998 Volvo S70
Nov 06, 2010 | 1998 Volvo S70
Jun 08, 2017 | 1998 Volvo S70
Mar 23, 2010 | 1998 Volvo S70
Sep 16, 2009 | 1998 Volvo S70
Dec 11, 2008 | 1998 Volvo S70
Dec 04, 2008 | 1998 Volvo S70
Sep 17, 2008 | 1998 Volvo S70
68 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: