SOURCE: 2004 titan
posible problem on ipdm module is the big fuse box toward the back on the right side inside engine compartment, some times the ecm relay goes out you might have the begining of this problem. (you canot get the relay by it self, only the whole module) I hope to be of help to you.
SOURCE: 1988 ford ranger 2.9 ltr engine stalls while driving , restarts in a few minutes usually
There are several possibilities, but based on how you described the symptoms I suggest a profile igniton pickup. On these systems the failure usually begins as dropping a cylinder occasionally,like a misfire,mostly during high underhood temperatures,will manifest into stalling and finally into a stall with no resart condition. Symptoms are most likely to occur in summer. The pickup is inside the distributor and the distributor must be disassembled to install it,the trickiest part being the removal and installation of the distributor drive gear. They are iron and easily broken. The simplest solution is another distributor. The ignition modules typically do not fail in this manner,but this is classic for the pickup coil. A code for loss of pip signal should be present, it is possible for a code to not be present,though very unlikely. Having worked on these systems for years this would be my first area of diagnosis.
43 views
Usually answered in minutes!
×