Cars & Trucks Logo

Related Topics:

John Hall Posted on Oct 20, 2017

Fuel pump reset switch on a 2005 mazda mvp mini van

5 Related Answers

Anonymous

  • 183 Answers
  • Posted on May 17, 2008

SOURCE: mini cooper fuel pump

Dear Customer,

No there is no switch for activate or deactivate your fual pumps ,from company ready made models

so you cant switch off or on,

THNX

Ad

George4444

  • 1 Answer
  • Posted on Dec 03, 2008

SOURCE: 2004 mazda mvp firing order

The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall. This is for a 2004 Mazda MPV.

Anonymous

  • 41 Answers
  • Posted on Mar 23, 2009

SOURCE: replace fuel pump on 2005 chrysler town & country.

i cant be avoided sometimes you just have to bit the bullet and remove the tank.

Anonymous

  • 202 Answers
  • Posted on Mar 24, 2009

SOURCE: can't find reset switch for fuel pump on mazda mpv

It is typically located in the rear of the vehicle in one of the side compartments. It has a red button on it. I would also check the fuel pump fuse, and relay.

Anonymous

  • 1 Answer
  • Posted on Apr 21, 2009

SOURCE: 96' Ford E150 fuel pump reset switch

mine is on the passenger side in front of the front door under the dash with a small hole for acess

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Can anyone locate fuel pump relay on 1994 mazda mvp 3.0 eng

Almost all fuel pump relays are found under the hood or under the dash sometimes...check your fusebox under the hood..it should say what it is underside of the fusebox cover...otherwise, it is about 1 inch square ad can be black, green, yellow etc with four prongs if i remember correctly..cheers
0helpful
1answer

What does it mean if there isn't any fuel in the low pressure filter on the 2004 mazda mvp

you should check your fuel pump not enough fuel is going to your low pressure filter
thanks
0helpful
1answer

Locating fuel pump relay on 1994 mazda mvp minnie van 3 wheel rear drive 3.0 eng.

hello
u will find a lot of wiring diagrams and circuit diagrams help books and stuff like this at reliable-store
the girl in the chat box can help u instantly... im a frequent buyer there since Im a mechanic so take help from there
0helpful
1answer

Car will start but then dies

No fuel supply check fuel filter and fuel pump
0helpful
1answer

Where is the reset swithch on 2005 mazda mvp

It is typically located in the rear of the vehicle in one of the side compartments. It has a red button on it. I would also check the fuel pump fuse, and relay
0helpful
1answer

Where is the fuel pump relay switch on 2005 mazda mvp

It should be underhood in the long black fuse box (main fuse box). It is located on the driver side of the engine bay. Look on the bottom of the cover and it will show which one is the Fuel Pump Relay.)
1helpful
1answer

Can anyone tell me where the camshaft sensor is on a 01 Mazda MPV mini van 2.5

W age of car..hard startn cud be a tuneup issue..bad dist cap..plug wires..fuel pressure reg or pump..git a data stream run w a factory scan tool....at a private shop only...for correctness n detail
0helpful
1answer

Ok My 1991 mazda Mvp Van wont start after replacing the 80 amp fuse any any Ideas

could be your starter or even you key switch.. i would start with having the starter checked.. if that is nto the problem then on to the key switch.. but it could be as simple as a bad battery or loose connection
0helpful
1answer

1998 MPV: 98 mazda mvp if i ground the black and red wirer a...

That wire is input 4S to the powertrain control module. I dont know if having it grounded all the time will affect the powertrain control computer but it doesnt seem to want to hurt the fuel pump circuitry itself from looking at the schematics. I'd try to ground it start it then make sure of course the relay opens when you shut it off then try to drive it to make sure the grounded pin on the PCM doesnt affect the transmission.
1helpful
1answer

1991 MAZDA MVP AND THERMOSTAT WAS PUT IN BACKWARDS

you have a crack block or a crack head does it come out from the top of the motor or the bottom and can you see where its leaking from
Not finding what you are looking for?

205 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...