Question about Acura Cars & Trucks
I am assuming you mean 1996 as they did not make a TL in 1986. So if it is a 1996 the firing order is 1-4-2-5-3-6
Posted on Nov 02, 2017
you will find this site usefull , here is the diagram for 1986 ford ranger 2wd 2.9liter v6 firing order .
Fix Ya vote is my Reward , thanks .
Posted on Jan 08, 2009
Posted on Mar 05, 2009
SOURCE: firing order
Hello bailsdenied: THe fireing order for a Acura NSX 3.2L DOHC (vtec) engine is 1-4-2-5-3-6. If this is the correct model of car then it is right. If this is not the right car then ask and I will send the correct one. Please rate the answer you recieve as this lets us nkow you were provided the correct answer to your question. Thank you for using FixYa. Roger
Posted on Apr 25, 2009
SOURCE: firing order for a 1986 gmc s15
To avoid confusion, ALWAYS replace spark plug wires one at a time.
The most important thing to remember about the removal and installation of a distributor, cap or spark plug cable is that all wires MUST be labelled before they are disconnected. Keep in mind that these figures depict a firing order where the distributor cap terminals are relative to EACH OTHER only and they do not necessarily depict the tower positions in relation to the rest of the engine. This is true because any distributor which has been removed and reinstalled may have been installed with the No. 1 spark plug tower at any position (360 degrees) in relation to the rest of the motor, as long as the rotor aligned to the No. 1 tower when the No. 1 cylinder was at TDC of the compression stroke (valves closed, ready for the plug to fire). As long as the remaining wires were connected in the correct firing order sequence (depending on direction of distributor rotation) the engine will run. DO NOT EVER remove more than one wire from the distributor cap at a time unless you tag ALL wires and towers to assure proper installation.
Fig. 1: 1.9L engine . Firing order: 1-3-4-2 . Distributor rotation: counterclockwise
Fig. 2: 2.0L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise
Fig. 3: 2.5L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise
Fig. 4: 2.8L engine . Firing order: 1-2-3-4-5-6 . Distributor rotation: clockwise
Fig. 5: 4.3L engine. Firing order: 1-6-5-4-3-2 . Distributor rotation: clockwise
I hope help you with this (remember rated this help) Good luck.
Posted on Oct 05, 2009
replacement glass use wally have a plastic thing behind the glass so just prime out the old glass carefully with a screwdriver from the mount and it will pup out and the new glass just press it in place with your hands and you will hear a click and its in its place.simple as that.
Posted on Jul 29, 2010
Tips for a great answer:
Feb 19, 2014 | 1986 Toyota Camry
Jan 28, 2014 | 1998 Acura TL
Oct 30, 2013 | 1996 Acura TL Series
Nov 04, 2012 | Cars & Trucks
The spark plug firing order for car?http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html
----------How to gap spark plug ?http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html-----------Spark plug Replacing for?http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html
-----------How to identify number one spark plug on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html
---------How does the spark plug wire go on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html
---------Spark plug Firing Order Diagram?http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html
-----------This will help.Thanks.
Feb 17, 2012 | 1996 Acura TL Series
Nov 09, 2010 | 1999 Acura TL
Apr 25, 2009 | Acura TL Cars & Trucks
Dec 02, 2008 | 1998 Acura TL
102 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: