SOURCE: replacing third brake light assembly
I dont think my third light has a bulb it looks like its conected to a black power supply i need to whats the name of it so I can get another one
SOURCE: SOLUTION: HOW TO REPLACE REAR BULBS ON 2002 & 2004 BUICK LESABRE
Rear tail lamps for the 2002 La Sabre has eight nuts that hold the cover in place ( one piece-all acroos the back of the car). Do not remove the nuts for the lock, the cover sits in place and is not secured to the lock. Use a 10 mm deep well socket. remove the nuts and lift the cover to replace the burned out bulb(s). The bulbs are #194 or #198 (very small bulbs), not the 3057. It is easy to locate the burned out bulbs by putting the car in reverse and shutting off the engine and then put the ignition key in the accessory mode. The lights will light unless they are burned out. Simply pull them out and replace with the new ones and put the cover back in place and secure the nuts.
SOURCE: 1999 camry trunk lid & high mount brake lights all inop...
Hi,
The jiggle method is not enough you have to look at the wires. I just did and I found out that all six wires were broken close to the splice. That splice is located close to the back seat.
Hope it hepls.
SOURCE: need 02 trailblazer third brake light removal
Open the full hatch.
Pull down the weather strip near the rear dome light.
There should be a wire with a connector in it. Disconnect it
Close the full hatch.
Open just the window hatch. There is 1 screw on either side of the bulb housing.
SOURCE: 2002 Chevy Blazer, rear brake lights do not work
I had a similar problem and when i went to the auto electric place the guy said its a brake switch next to the brake pedal which is not working. He took it out and fixed it. Now its all fine.
534 views
Usually answered in minutes!
×