1999 Ford Contour Logo

Related Topics:

Where is the map sensor located on a 1999 Ford contour with a 2.0 engine

5 Related Answers

A

Anonymous

  • Posted on Jul 06, 2008

SOURCE: how to time up a 1999 ford contour

how to change a timing belt

Ad

Anonymous

  • 491 Answers
  • Posted on Feb 18, 2009

SOURCE: Location of fuel map sensor in 1999 Alero

on the air filter intake hose

Bill Hackett

  • 383 Answers
  • Posted on Apr 05, 2009

SOURCE: 1999 Nissan Altima MAP sensor location

The MAP sensor is located on the driver's side of the engine compartment next to the air filter housing and shock tower.
It is a small plastic component with one vacuum hose coming off of it and an electrical connector that has two wires. It might be advantageous to write in and let me and/or other techs know what the symptoms are prior to replacing the sensor. Sometimes just replacing the part is a waste of money. The fact that the code has indicated the problem is the MAP sensor, doesn't mean it is bad. As an example, check to see if the Vacuum hose is secure and not disconnected or split at either end.
Good luck.

Anonymous

  • 15 Answers
  • Posted on May 16, 2009

SOURCE: Where is the camshaft position sensor located on a 1999 ford contour?

what is your engine size?? give me the eighth vin number starting from left to right..then i will be able to help you..

Anonymous

  • 5 Answers
  • Posted on Sep 16, 2009

SOURCE: WIRING DIAGRAM A/C SYSTEM ON A 1999 FORD CONTOUR,2.0L ENGINE

Haynes Manuals not Chiltons are the source I use for wiring. You local library might have one and photocopy it off.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to replace a throttle position sensor on a 2000 ford contour

Hey DonAld, these are not hard to replace..( I do not know which engine you have..it makes a difference!! ).. take a PICTURE of where the current TPS os positioned and located... the radial (adjustment) location IS critical!!..
here is a link to Autozone, ...O'Reilly's, and Advance Auto should have one too..

Ford Contour Throttle Position Sensor TPS

https://www.oreillyauto.com/shop/ignition---tune-up-16776/engine-sensors-17084/throttle-position-sensor-12043/2000/ford/contour?q=tps

Advance Auto Parts Down for Maintenance
0helpful
1answer

Need to find the crankshaft sensor on a 1999 Ford Contour 2.0

https://www.google.com/search?q=crankshaft+sensor+location+on+1999+ford+contour+2.0L&espv=2&biw=1366&bih=667&tbm=isch&tbo=u&source=univ&sa=X&ei=qV5VVOChJ4mBygSqnoDQAw&ved=0CB0QsAQ
0helpful
1answer

1999 Ford Contour goes dead and will not start till engine cools, What causes this problem?

This could be either the crankshaft sensor or the temp sensor on the engine. IF you have a check engine light that is on, you can get the codes from it and see.
0helpful
1answer

Where is the fuel filter located on a 1999 ford contour V6 2.5L

You can stop listening to anyone & just google
the codes, you would see you have 2 failed exhaust
converters

By the time you find out why & resolve that & replace the
failed converters & oxygen sensors, you can kiss $1000 good by
1helpful
1answer

What is bank 1 sensors location on ford contour

Bank 1 is where the number one cylinder/spark plug is located. If this is a 4 cylinder engine, number 1 is at the front of the motor and bank 1 is irrelevant and the number 1 sensor would be the one screwed into the exhaust manifold attatched to the cylinder head. If it is a 6 cylinder than number one is on the side closest to the radiator, and at the back of the engine near the exhaust crossover. The number 1 sensor is going to be the one screwed into the exhaust manifold just outside the cylinder head.
0helpful
1answer

Where is the speed sensor located on a 1999 Ford Contour?

For 1999 Ford Contour 2.0L MFI DOHC 4cyl the Vehicle Speed Sensor is located bBehind dash.

Hope helps (remember rated and comment this).
0helpful
1answer

I have a 1999 Contour, it died while driving. Has power, no start

Most the time the engine dies while driving is due to a crankshaft sensor failure. When this fails, the engine can't be started since the ECM doesn't know the location of TDC to provide proper ignitions. Have a shop check out and replace this part then you are good to be back on the road. Good luck.
1helpful
2answers

I need the location of the o2 sensors on a 1997 ford contour gl 4-121 2.0 dohc

Ford contour has 4 O2 sensors, one under the coil pack between the engine and firewall (bank 1, sensor 1 and it's a pain to reach), one in front between the radiator and engine and two accessible from underneath.
0helpful
1answer

Where is the camshaft position sensor located on a 1999 ford contour?

what is your engine size?? give me the eighth vin number starting from left to right..then i will be able to help you..
0helpful
1answer

Rough idle

check to see if your map sensor is plugged in
Not finding what you are looking for?

410 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...