SOURCE: 2001 dodge durango v8 4.7
It is acually called the vehicle speed sensor I do believe. It should should be located on the top of your transmission with a wiring harness attached to it. It should also have 1 bolt holding it in also. Whatever you do, do not rotate the gear when you remove it. Try to mark the exact way it came out when you replace the sensor. When you pull the sensor out it will have this gear attached to it which will need to be placed into the new sensor and put back into the vehicle in the same way it came out or you will throw a code and it will not be pretty. Good luck, hopefully I didn't scare you it can be a simple repair just mind your P's and Q's.
SOURCE: security system stuck on no start 2002 dodge durango
You need to buy a remote key fob and have it programed.The factory security system can't be easly disabled.
SOURCE: 2004 Dodge Ram 1500, 4.7L V8, rattle/knock
If it's doesn't sound like it's your engine which i am thinking not. Check to see if there any heat shield that may have come lose, like the heat shield to the spark plug wire or heat sheild along the down pipe.
Good luck and hope this was the rattling your taking about as it heats up it expands and tighten's up.
SOURCE: loacte the fuel filter on 2000 dodge durango 4.7 liter v8
if i am not mistaken the fuel filter is built into the fuel pump. which requires you to drop the tank and replace both.
350 views
Usually answered in minutes!
×