Question about Infiniti Cars & Trucks
SOURCE: 2000 Infiniti I30
Sure! pop the trunk and remove screws and screw covers inside, then look in the wheel wells for the remaining screw/clips. Lastly underneath, near exhaust may be a few last screws to keep from flapping. Just make sure to watch for any wires from rear cameras, or reverse sensors. You will not need to remove any of the foam behind bumper.
Posted on Sep 03, 2008
i have this deck...just put it on craigslist...if you pop out the heater vents the screws become visible to remove the unit. The screws on the side of the deck itself tend to be in tightly...but they will come out. my name is justin 2539051585
Posted on Feb 05, 2010
SOURCE: infiniti I30 2002
There is a printed notice on the inside of the glove cmpt. door. (02 I30). It indicates the filter is washable. To reach the filter one must remove the glove compartment door. Dealer said "plastic tabs" can be broken if not done properly. The filter is between the blower motor and evaporator.
Posted on Sep 02, 2012
Tips for a great answer:
Nov 06, 2015 | Infiniti Cars & Trucks
Oct 02, 2015 | Infiniti Cars & Trucks
Jul 19, 2015 | Infiniti Cars & Trucks
Sep 18, 2014 | Infiniti Cars & Trucks
May 05, 2014 | 2001 Infiniti I30
Sep 02, 2012 | Cars & Trucks
Oct 23, 2017 | Infiniti I35 Cars & Trucks
Jun 18, 2009 | 2004 Infiniti QX4
Oct 03, 2019 | Infiniti Cars & Trucks
Sep 15, 2019 | 2002 Infiniti I35
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: