Question about 2004 GMC Envoy
Posted by Anonymous on
The battery is on the right side behind the fuse box. You need a metric set to undo the 3 screws. Theres one that attaches to the body, one to the bar that goes along the top, and theres one on the left side below the vacuum hose and air induction. After you've taken out those three, you should lift the whole thing out(battery and shroud) together. It's hard to take the shroud off before you lift the battery out. After that, you have to pry the shoud off the battery. The two terminals in the back make it hard. Then just go to any auto parts store and they'll give you a new one.
Posted on Jan 28, 2009
be sure the gate is fully closed or it will not roll up if it is firmly in place and still does not go up you will have to remove the cover and see if the actuator plastic has broken off from the switch, it also could be a bent rod and or the switch is bad. Check fuses as well just to be sure before going to all the other work to pull cover off. Hope this is helpful and thanks for using Fix-ya.
Posted on Jan 19, 2010
Either you have a vacuum leak or electrical issue.
First Inspect all vacuum lines.
Next test engine vacuum (17-21 hg's)
If all a-ok then its electrical and you got your work cut out for ya.Have to probe the circuit to see where its shorting and what its shorting to. I don't think it will be electrical simple because you would be blowing fuses if it was. Sounds more vacuum related..... and thats worse.
Posted on Mar 24, 2010
Tips for a great answer:
Jun 15, 2018 | GMC Cars & Trucks
Aug 12, 2016 | 2004 GMC Envoy XUV
Sep 13, 2015 | 2004 GMC Envoy XUV
Aug 08, 2011 | 2004 GMC Envoy
Feb 16, 2011 | 2004 GMC Envoy
Nov 06, 2010 | 2004 GMC Envoy
May 14, 2010 | 2004 GMC Envoy
Jan 19, 2010 | 2004 GMC Envoy
Apr 05, 2009 | 2004 GMC Envoy
Feb 17, 2019 | 2004 GMC Envoy
101 people viewed this question
Usually answered in minutes!