Question about Saturn Cars & Trucks

1 Answer

Which two wires do i connect my jumper wire to in order to close the sunroof?

I am trying to manually close the sunroof on a 2003 saturn vue by using a jumper wire on the sunroof switch but i am not sure which wires to jump. there is a solid black wire then a orange with a black stipe wire then a blue wire then a green wire.

Posted by Kati Robinson on

Ad

1 Answer

richie46

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Saturn Master
  • 12,962 Answers

Get a hold of the schematic for the car to be guided accordingly.

Posted on Aug 24, 2017

Ad

5 Related Answers

Anonymous

  • 32 Answers

SOURCE: 2003 Saturn Vue Windows and Sunroof

the relay is plobable bad. try testing or replacing the relay. it is located in the fuse box under the hood. it should be labeled PWR WDW

Posted on Oct 17, 2008

Ad

Anonymous

  • 379 Answers

SOURCE: 1998 dodge ram 1500 4x4 stereo wiring

glad you posted what colors you do have , cause 2 resources didn't match ,actually 3 , i did find a match to your colors was a 97 year model premium radio, so we have a match .....

black/ light green = ground
dark green = left front spkr +
purple = right front spkr +
blue/white = right rear spkr -
brown/blue = left rear spkr -
brown/yellow = left rear spkr +
blue/orange = right rear spkr +
black/yellow = park lamps
brown/red = left front spkr -
orange = dimmer signal
pink = fused battery +
green/red = radio choke relay
red/white = fused ignition
blue/red = right front spkr -

cheers

djmac62 is also an excellent answer

Posted on Jan 10, 2009

MNfisherman

Nate Stansfield

  • 11896 Answers

SOURCE: 1995 Ford Windstar Speaker Coding Scheme.

www.installer.com as speaker schematics

Posted on Jan 17, 2009

Anonymous

  • 1305 Answers

SOURCE: need a stereo wiring diagram for my van.

Yep!
Here you go...
1995 Mercury Villager Car Stereo Radio Wiring Diagram
Radio Constant 12V+ Wire: Green/Purple
Radio Ignition Switched 12V+ Wire: Yellow/Black
Radio Ground Wire: Black/Light Green
Radio Illumination Wire: Green
Radio Dimmer Wire: N/A
Radio Antenna Trigger Wire: N/A
Radio Amplifier Trigger Wire: N/A
Front Speakers Size: 5′ x 7′
Front Speakers Location: Doors
Left Front Speaker Wire (+): Orange/Light Green
Left Front Speaker Wire (-): Light Blue/White
Right Front Speaker Wire (+): White/Light Green
Right Front Speaker Wire (-): Dark Green/Orange
Rear Speakers Size: 5′ x 7′
Rear Speakers Location: Side Panels
Left Rear Speaker Wire (+): Light Brown/White
Left Rear Speaker Wire (-): Light Brown/Yellow
Right Rear Speaker Wire (+): Light Brown/Green
Right Rear Speaker Wire (-): Brown/Pink

That's what they show for factory
K

Posted on May 31, 2009

ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: THE WIRING ON THE FAN

1) ECM Fan Clutch 1) K160 18BR/OR Park Lockout Solenoid Control Green
1) BR / OR = Brown/Orange unit with Green
2) K900 18DB/DG Sensor Ground 2) Black
2) DB / DG = Dark Blue/Grak Green unit with Black
3) K161 18BR/LB Fan Speed Sensor White
3) BR / LB = Brown/Light Blue unit with White
4) Not Used
4) Not Used
5) F856 18YL/PK 5 Volt Supply Orange
5) YL/PK = Yellow/Pink unit with Orange
6) F504 20GY/PK Fused Ig. Sw. Output Red
6) GY/PK = Gray/Pink unit with Red
With this, you have 5 due color cables unit to the 5 full color cables. Run.

Good luck, and rated this help (and us chat).

Posted on Aug 27, 2009

Testimonial: "perfect, just what i needed/ easy to understsnd the next time I have a problem you will be my answer, thankyou so mutch. Mark, in Dallas"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Chevy Envoy Denali moonroof stuck open manually close


You mean GMC not Chevy ! Chevy doesn't make the Envoy . There is no way to manually close the sunroof !
Power Sunroof Inoperative
If voltage is not measured on the sunroof switch open signal or sunroof switch close signal circuits, the fault could be in the retained accessory power (RAP) supply voltage circuit, battery positive voltage circuit, or sunroof motor ground circuit. If the sunroof motor is not being powered, neither will the sunroof switch signal circuits.

2

Attempt to operate the sunroof through its full range of functions in order to verify that the power sunroof inoperative fault is present.
Does the power sunroof system operate normally?
--
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
YES - Go to Step 3

3
Is the sunroof in the fully closed position?
--
YES - Go to Step 4
NO - Go to Step 7

4
  1. Disconnect the sunroof switch.
  2. Turn ON the ignition, with the engine OFF.
  3. Connect a 3-amp fused jumper wire to the low reference circuit of the sunroof switch harness connector.
  4. Connect the other end of the 3-amp fused jumper wire to the sunroof switch open signal circuit of the sunroof switch harness connector, for 3 seconds.
Did the sunroof open?
--
YES - Go to Step 17
NO - Go to Step 5

5

  1. Disconnect the 3-amp fused jumper wire.
  2. Measure the voltage from the sunroof switch open signal circuit of the sunroof switch harness connector to the low reference circuit of the sunroof switch harness connector.
Does the voltage measure near the specified value?
B+
YES - Go to Step 13
NO - Go to Step 6

6

Measure the voltage from the sunroof switch open signal circuit of the sunroof switch harness connector to a good ground.
Does the voltage measure near the specified value?
B+
YES - Go to Step 14
NO - Go to Step 10

7
  1. Disconnect the sunroof switch.
  2. Turn ON the ignition, with the engine OFF.
  3. Connect a 3-amp fused jumper wire to the low reference circuit of the sunroof switch harness connector.
  4. Connect the other end of the 3-amp fused jumper wire to the sunroof switch close signal circuit of the sunroof switch harness connector, for 3 seconds.
Did the sunroof close?
--
YES - Go to Step 17
NO - Go to Step 8

8

  1. Disconnect the 3-amp fused jumper wire.
  2. Measure the voltage from the sunroof switch close signal circuit of the sunroof switch harness connector to the low reference circuit of the sunroof switch harness connector.
Does the voltage measure near the specified value?
B+
YES - Go to Step 15
NO - Go to Step 9

9

Measure the voltage from the sunroof switch close signal circuit of the sunroof switch harness connector to a good ground.
Does the voltage measure near the specified value?
B+
Go to Step 14
Go to Step 10

10

  1. Disconnect the sunroof motor harness connector.
  2. Measure the voltage from the battery positive voltage circuit of the sunroof motor harness connector to a good ground.
Does the voltage measure near the specified value?
B+
Go to Step 11
Go to Step 19

11

Measure the voltage from the retained accessory power (RAP) supply voltage circuit of the sunroof motor harness connector to a good ground.
Does the voltage measure near the specified value?
B+
Go to Step 12
Go to Symptoms - Computer/Integrating Systems in Computer/Integrating Systems

12

  1. Turn OFF the ignition.
  2. Measure the resistance from the ground circuit of the sunroof motor harness connector to a good ground.
Does the resistance measure less than or equal to the specified value?
5 ohms
Go to Step 16
Go to Step 20

13

Test the sunroof switch close signal circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 18

14

Test the sunroof switch low reference circuit for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 18

15

Test the sunroof switch open signal circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 18

16

Test the appropriate sunroof switch signal circuit for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 18

17

Inspect for poor connections at the harness connector of the sunroof switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 21

18

Inspect for poor connections at the harness connectors of the sunroof motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 22

19

Repair the short to ground or open in the sunroof motor battery positive voltage circuit. Refer to Wiring Repairs and Connector Repairs in Wiring Systems.
Did you complete the repair?
--
Go to Step 23
--

20

Repair the open in the sunroof motor ground circuit. Refer to Wiring Repairs and Connector Repairs in Wiring Systems.
Did you complete the repair?
--
Go to Step 23
--

21

Replace the sunroof switch. Refer to Sunroof Switch Replacement .
Did you complete the replacement?
--
Go to Step 23
--

22

Replace the sunroof motor. Refer to Control Module References in Computer/Integrating Systems.
Did you complete the replacement?
--
Go to Step 23
--

23

Operate the system in order to verify the repair.
Did you find and correct the condition?
--
System OK
Go to Step 2

Jul 31, 2016 | Cars & Trucks

1 Answer

How can i close the sunroof on a 2002 chevy


check the 25 A breaker (PWR WDO) in fuse block I/P
if the driver power window is working your breaker is ok
check terminal B of the connector 2( pink wire) of the sunroof control module for 12 volts. check terminal D connector 2 of the sunroof control module(black wire) for a good ground. If the sunroof does not work with the switch you could jumper the power to the motor. You could try jumping terminal B to terminal A ( dark green wire) and jumping terminal D to terminal C (dark blue). If the sunroof goes the wrong way, change terminal B to terminal C and terminal D to terminal A. If it doesnot work the motor is dead.

Oct 15, 2014 | 2002 Chevrolet Cavalier

2 Answers

How to manually close a sunroof


Can be manually close with the good allen key. Take the plastic with lights off. Put it where the circle and turn slowly.
11_14_2017_10_15_47_am.jpg

Aug 25, 2014 | Cars & Trucks

2 Answers

Saturn vue sunroof


Sounds like a insufficient ground situation. Start out by cleaning your battery connections. You probably have a ground wire that is responsible for several circuits, not connected securely to the chassis. This could be under the dash. You may have to consult your wiring diagram on your vehicle.

May 16, 2014 | 2005 Saturn VUE

1 Answer

2003 saturn vue driver window doesn't go up and down . The regulater and motor funtion properly . All other windows work correctly . The console switch on the left side is for both left sides wind


BY PASS SWITCH BY RUNNING A FUSED JUMPER WIRE FROM THE BATTERY POSITIVE TERMINAL TO WINDOW MOTOR CONNECTOR, HOT SIDE, AND A NEGATIVE WIRE BACK TO BATTERY NEGATIVE TERMINAL...IF WINDOW OPERATES....IT IS THE SWITCH

Feb 22, 2013 | 2000 Saturn SL

1 Answer

2004 SATURN VUE A/C NOT WORKING


By pass the pressure switch or connect the compressor's clutch wire directly to a positive terminal or a 'live' wire .

Aug 28, 2009 | 2003 Saturn VUE

1 Answer

My sunroof will not close. I tested my fuses and they seem to be working, no broken ones and changed a few just in case.Tell me whats the next step or problem.2003 nissan murano owner.


Next step is to test the sunroof open/close switch itself, it might be faulty. Don't know the Murano, but often the switch-cover can be removed relatively easy. Test the switch (or better said: the wires fitted to it) with a volt-meter. You should have something like 4 wires; ground, + in, open (= + out), close (= + out).

When the fuse is not blown you should easily determine the + in wire (otherwise the fuse probably is blown), then set/hold the switch to open (or close) and see wether there is a + out voltage. If there is, it's probably the sunroof motor, something for the dealer to tackle ...

PS: Stupid question perhaps, but you're sure the sunroof is not in a "locked" state, some sunroofs have a manual (master-) lock ...

Aug 18, 2009 | 2003 Nissan Murano

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...