Peugeot 206 51 plate can't put roof back up ..just beeping

Take the license plate off and cut a whole there to gain assess into the trunk and open. May fix problem and welder or just put the plate back

Hard top folding roof? Have the codes read. I don't work on Peugeot, But I work on others. They have a ton of sensors on them. You need to know which one is acting up. Is it the sensor or a wire or module.

faulty motor??????

you still have air in the system

yes put key inignition turn to first turn at the end of the indicator stalk there is a button press and hold in until it displays and makes beeping sound same scenario to turn back on

I have a 206 cc of production year 2002 and the following solution worked for me. My problem was that the roof would not close anymore electronically and there were continuous (and annoying) beeps when driving. Following solved my problem:
1. Followed instructions to close the roof manually. This you can normally find on your cars manual. Alternatively have a look at video above for the manual closing of the roof.
2. After successfully closing the roof manually re-position the jumpers to automatic locking position. and re-tighten the depressurization bult.
3. Open the roof normally with the electric roof-switch. (check that the net at trunk is also closed).
These steps helped me reset the automatic roof mechanism.

Put a resistor across the connector leads of the old motor. Something about 1 Watt and about 20 Ohms. This should remedy it- it will look like a motor winding to the onboard diagnostic computer.

Unfortunately, there is almost nothing that you can do yourself with this. It will require a manufacturer reset at your local Peugeot Garage.

Hi ya can you help my peugeot 307 cc hardtop opens with np problems. But when closing the roof goes back into place but the boot lid parts that hides the roof doesn't shut can anyone help I'm driving round with the roof down. Help