Question about 1998 Plymouth Breeze
All you need is a long prubar (or you can rent a tensioner wrench at the parts store) essentially a open end wrench with a 3 ft handle.
Put the tensioner wrench on the nub of the tensioner and pull back... this will release the tension on the old belt. Remove it from one of the pulleys, and then from the entire system.
Note how it is routed through the pulleys, and put the new one on the same way.
The car should have a sticker on the radiator support telling you the path of the belt.
Posted on Jan 08, 2009
SOURCE: oil leak 1998 plymouth breeze
First check your PCV system and make sure it is in good working order this is a must. Then check the cam sensor or oil sending unit, it is located between the engine and fire wall under the exhaust manifold.
Posted on Mar 16, 2009
Most eBay sellers that deal with key fobs will provide programming instructions...ask the seller before you buy from them.
Posted on Mar 31, 2009
these bulbs go in from behind the headlight assy. from under the hood look at the back of the headlight and locate the wiresgoing to the back of the headlight you can turn the connector or pull it out gently then turn the back of the bulb to remove it replacement is the reverse-- don't touch the glass of the new bulb, handle it by the base-fingerprints will shorten the life of a bulb of this type some parts stores will sell you the bulb and replace it for you if its not to hard for them-- too difficult then the automotive center at wally world or k mart will replace it for a fee
Posted on Nov 23, 2009
Tips for a great answer:
May 20, 2010 | Cars & Trucks
Jan 13, 2010 | 1998 Plymouth Breeze
Nov 19, 2009 | 1998 Plymouth Breeze
Jun 09, 2009 | 1997 Plymouth Breeze
May 18, 2009 | 1998 Plymouth Breeze
Jan 08, 2009 | 1998 Plymouth Breeze
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: