Question about Cars & Trucks
My atv t013 engine will start but it doesn't have enough power to move when I put the gas on. When I gradually put gas on it doesn't go but when I put more the engine buffers and it eventually dies and shuts off. It doesn't have enough power to go up a hill with no one on it. Someone please help. Thank you
Hey have u tried this manuals site big-manuals.com ? Like manuals are great and for automobile problems it's suggested that manuals should be referred.. I personally like big-manuals.com it's a great website and very helpful.. u must try it once
Posted on Dec 03, 2019
Why don't u try a manual.. this problem can easily be looked up there. And the website.. reliable-store.com has all kinds of custom made manuals so you will definitely find a solution there.. try it once
Posted on Dec 03, 2019
Replace your fuel filter,may be clogged,you can get them at Walmart,Home Depot or Lowe's,also check your gas lines to make sure you have no leakage.Also drain gas and put new gas in,use regular unleaded.Also check your spark plug,put a new one in,sometimes it may look good but it's not.Then check your air filter,try a new one one too.After all this,it should run like new. ATV T013 125cc Kids ATV
Posted on Jul 31, 2017
Testimonial: "Ok I drained filter. Do u think the carburetor has anything to do with it?"
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: wont start
when you turn the key to the ON position you should hear your electric fuel pump come on (a quiet hissing noise) if you dont hear this noise your fuel pump has gone out, if you do hear the noise you might want to check your fuel filter it could be clogged and starving the engine of fuel
Posted on Sep 01, 2008
SOURCE: 1999 Yukon cold start problems.
1999 Yukon Start Issue - I have replaced the octopuse, battery, fuel filter, fuel pump, still having problems starting in cold weather, sometimes after a heavy rain.
Posted on Dec 08, 2008
Most Likely Coolant temp sensor & connector.Located in cyclinder head under upper radiatior hose.Two wires to connector yellow & black.Replacement sensor is brass (from saturn) Original is ceramic & cracks cause poor performance,stalling,idle issues.Also check plugs & wires for carbon tracking.Replace plugs & wires as a set all at once.Hope this helps
Posted on May 13, 2009
SOURCE: car doesn't have power its finds difficult going up a hill. recently they put petrol instead of diesel drove for 1 km before stopping and removed the fuel, cleaned the tank and the car started nor
Try changing the fuel filter. If that does not help, have someone test the injector pump for pressure. Last would be a compression test on the cylinders. Drain oil and replace oil filter very soon.
What has happened is the diesel fuel is a lubricant and gasoline is a solvent. As gasoline is much thinner, it could wash down the cylinders and get into the oil pan thinning the oil and ruining the bearings. This would be the reason to test the pressure in the cylinders to find out if you lost compression with the rings in the cylinders.
Next, the injector pump for the diesel has seals and tolerances for inside components. Again, since gasoline is a solvent and not a lubricant, the internal parts could be worn out by not having diesel fuel to lubricate the injector pump parts.
If someone working at the fuel station made this mistake, all the costs should be paid by the station. This is something which could be taken to court if the station does not pay.
Posted on Sep 20, 2012
Tips for a great answer:
Feb 04, 2016 | Cars & Trucks
Dec 10, 2015 | Suzuki Cars & Trucks
May 19, 2012 | 2005 Scion xB
May 19, 2011 | 2001 Volkswagen Beetle
May 17, 2011 | 1998 Pontiac Grand Am
Apr 21, 2010 | 1995 Nissan Maxima
Feb 13, 2010 | 2006 Toyota Tacoma
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: