2001 tacoma codes p1300,1305, 1310,1315 igniter malfunction what does this mean?

SOURCE: toyota tacoma 2001 failed to crank, got obd II

AIR FUEL SENSOR IT IS LOCATED ON THE EXHAUST MANIFOLD.IT LOOKS LIKE OXYGEN SENSOR.

SOURCE: hi i have 2001

there is not a code listed in the toyota repair manual p0001 but there is a poo11 and it is part of the vvt system and the code says bank 1 intake valve timing advance that there is a differance between crank and cam sensor signal to the computer. and could be a number of things from cam sensor,crank sensor,vvt solenoid,wiring,computer.this problem needs to be checked with a scan tool so each sensor can be checked and the right one replaced........good luck and i hope that this info helped..........let me and fixya know how i did and if i can help in any other way.........this is the only code that was close to what you had down and there is no pooo1 code ..............if you need any more help give me all the info that you can............

SOURCE: Need diagram for ignition coils

Same as Ford Escape.
P0351 - Ignition Coil A - Primary/Secondary Circuit

Cylinder #1, Pin 26 at the PCM, computer.

I would replace the coil on the plug (COP) for that cylinder and see if its' ok. If not, then it is possible that the bad coil took out the driver in the PCM. The test at Pin 26 to see if the light blinks, must be done with the correct tester or it will damage the PCM.

Hope it's the coil.

report results.

4 cylinder or 6 cylinder engine?