Question about Cars & Trucks

1 Answer

Wont automatically feed paper to shred

Does not engage automatically. Must push forward button to engage

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 31,018 Answers

There is a small switch or an infra-red sensor that sees the paper. Check it in the slot of the shredder.

Paper Shredder Parts

shredderparts.com/
We sell all sizes of paper shredder gears, switches, blades, etc. to facilitate your repair. We also have shredder replacement parts for crosscut paper shredders, ...

General Shredder Parts - Shredder Repair Services

www.shredderrepair.co.uk/general-shredder-parts-227-c.asp We can supply a wide selection of parts for various makes of shredder some of the ... Paper Shredders ... Please note SRS take no responsibility for loss, damage or personal injury caused by the fitting of spare parts by non SRS personnel.

Paper Shredder Parts ' All brands inc Fellowes & Rexel » Document ...

https://www.documentdynamix.com.au/service/paper-shredder-parts/ Document Dynamix Australia has a strong reputation for responsive supply of paper shredder replacement spare parts and support. Whatever brand your paper ...

Posted on Jul 17, 2017

Ad

1 Suggested Answer

Anonymous

  • 84 Answers

SOURCE: all of a sudden wont go forward or rev .

Hello, The first thing to check is the transmission fluid level. When you check the fluid does it have a burnt smell? If so, you probably have an internal failure. Have you had the transmission serviced? Your trans filter may be stopped up.
I hope this helps.
CYA, Gator241

Posted on Feb 07, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have replaced all the actuators and transfer case switches on my 1998 chevy 4x4 and the front differential wont engage any information on what I am missing


check to see if you have automatic hub locking. These units can be vacuum or electric operated and are prone to failure of the system

Dec 27, 2014 | Cars & Trucks

1 Answer

Automatic transmission how to shift


push the button on the top or side of gear stick then shift the stick back then forward. ensure that the foot brake is engaged while doing so

Sep 25, 2013 | Mitsubishi Lancer Cars & Trucks

1 Answer

Car wont get out of park when i engage brake the safety switch is staying on locking it in park


Looking down at the shifter, look a little forward and to the right.
You will see a little plastic cap. Lift it off and you will see a reset button. Push it down with a phillips screwdriver and it will release the shifter from park.

Mar 28, 2013 | 2006 Ford Fusion

1 Answer

I have a 1995 Ford Bronco with Push Button 4X4 with automatic locking hubs. Has a 351 engine. The problem I have is when you push the button to engage 4X4, the front tiers to do not pull on either high or...


It sounds like your front hubs are worn out. Actually just 1 of them. You can put in 4 high or low pull it forward chock it raise the frnt wheels to see which one isnt locking by turning it. Most people just go ahead and buy new set of manual Waren lockers.

Jan 17, 2011 | 1995 Ford Bronco

1 Answer

Car does not drive forward but works in reverse


Sad to say but your automatic transmission has bit the dust.

Jul 24, 2009 | 2004 Chevrolet Cavalier

1 Answer

All of a sudden wont go forward or rev .


Hello, The first thing to check is the transmission fluid level. When you check the fluid does it have a burnt smell? If so, you probably have an internal failure. Have you had the transmission serviced? Your trans filter may be stopped up.
I hope this helps.
CYA, Gator241

Jan 30, 2009 | 2000 GMC New Sierra 1500

1 Answer

Noise when engaging 4wd


I have had this problem and it could be one of three things, first the truck has automatic locking hubs, lack of lubrication to these hubs could cause them to make exessive noise while engaging. also you could need to lubricate your universal joins on your forward drive shaft. lastly my problem was abs wheel sensor actuator in drivers front hub had (internal part of hub looks like a large gear with teeth) had broken a gear off causing the hub to get wear in it making it clunk while engaging the four wheel drive.

Dec 20, 2008 | 2000 GMC Yukon

2 Answers

Car engages in gear without clutch pedal down and car will not drive daewoo matiz


if it wont drive how do you kno its engaging if it is in gear and you arent pushing in the clutch it should move forward if it doesnt move then you will have to replace the clutch

Nov 12, 2008 | Daewoo Nubira Cars & Trucks

1 Answer

AUDI A4 AUTOMATIC SLOW TO ENGAGE FORWARD GEARS ,REVERSE ENGAGES INSTANTLEY BUT TO MOVE FORWARD I NOW SELECT DRIVE FOR AROUND THREE MINUTES THEN MOVE OFF SLOWLEY,THEN ALL GOES WELL


Not overly familiar with Audis but it sounds like either a.) you have an electronic tranny that has a serious bug or b.) there's a problem in the computer of the car itself. What is sounds like is the car is taking a long time to "understand" that you're telling it to move forward. How new is the car? When you push on the gas before the three minutes, what happens?

Oct 21, 2008 | Audi A4 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...