Cars & Trucks Logo

Related Topics:

Where is body control module located on 1995 grand cherokee

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Mar 23, 2009

SOURCE: where is the body control module located on a 1997 town & country

It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the BCM.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the BCM to the junction block. Slide the BCM downward to disengage guide studs on jb from channels on BCM mounting bracket

Ad
A

Anonymous

  • Posted on Apr 23, 2009

SOURCE: body control module location

the location of the bcm is at the passenger side glove box area12900_pcm_2.jpg

c17hydro

Greg Bernett

  • 2993 Answers
  • Posted on Jun 23, 2009

SOURCE: try to locate body control module on a 94 buick park ave

BCM --The Body Control Module is located on the right side of the vehicle and positioned under the instrument panel. In order to gain access to the module, it will be necessary to first remove the trim panel.

Anonymous

  • 523 Answers
  • Posted on Oct 30, 2009

SOURCE: 1996 Plymouth grand voyager se-need diagram

The BCM is located on the drivers side under the the steering column. It is behind the fuses and to get to it you have to remove the bash board plastic, than a pice of metal and than you have to remove the fuses box. It will take you approximately 20 min to remove everything. Once you remove the BCM you need to take note of the Part Number P/N. It has to be the same P/N on the replacement BCM. You can use any BCM from years 1996-2000 but make sure the electrical configuration is the same as yours (Power windows, alarms, etc.). I bought my BCM on the junk yard for 35 dollars and my car works perfectly.
I hope this may have assisted you,
Tom

Anonymous

  • 306 Answers
  • Posted on Feb 06, 2010

SOURCE: Where is the body control module located on 2000 yukon

under the dash on the drivers side. above the break pedal

Testimonial: "Thank you for your help. The module was in the location you described. "

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2006 Pontiac Grand Prix. Where is the Body Control Module (BCM) on it please?

Question edited for clarity, add maker.
Question moved to model category.

Jeff our Automotive electronic expert provides the answer

Jeff Armer
Jan 28, 2024
Body Control Module (BCM)
Below the left side of the I/P, left of the steering column

and some more information from me

Your vehicles body control module is located under the dash on the drivers side of the vehicle.
Jan 10, 2011

Where is the body control module located on a 2004 pontiac ...

https://www.google.com/search?q=2006+pontiac+grand+prix+body+control+module+location

..
0helpful
2answers

2001 jeep grand Cherokee, all window will not function and drivers door lock ????

Check the wires that run through the door pillar they do break in time as door opened repeatedly .
0helpful
1answer

1995 jeep grand cherokee lorado, power windows (all) don't work

You need to have the body control module scanned for fault codes.
0helpful
1answer

Jeep grand cherokee alarm system

The 1995 Jeep Grand Cherokee Laredo Anti-Theft System is equipped with Vehicle Theft Security System (VTSS). VTSS system monitors vehicle doors, hood, liftgate and ignition. If an attempt is made to enter or operate vehicle without proper disarming of system, vehicle horn will sound, headlights, taillights and parking lights will flash, and engine will be prevented from running.

The following wiring diagram and electronics circuit contains detail schematics of The 1996 Jeep Grand Cherokee Laredo Anti-Theft System. Herein you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures.

Try HERE and also, remember that here can find the Jeep Grand Cherokee Service Repair Manual.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.
3helpful
1answer

No spark Told to replace ignition control module where is it located

Your 95 Jeep does not have an ignition control module. This ignition system has a exterior mounted ignition coil and also a pick up switch inside the distributor.
3helpful
1answer

NEED TO CHANGE BODY MODULE IN 1999 JEEP CHEROKEE. WHERE IS IT LOCATED?

The Cherokee doesn't have a body control module however the Grand Cherokee does. It is behind the kneeblocker trim panel under the steering column directly in front of the drivers left knee.
11helpful
4answers

Power windows won t work

There are broken wires in the wiring harness between the frame and your driver's side door. These wires control all the windows and door locks in a 95 Jeep. Same thing happened to me. You will have to cut the rubber boot to get it off and check which wires are broken and repair them.
0helpful
1answer

1995 Grand Jeep Cherokee

The lower speeds are controlled by a resistor block. That's what needs to be replace. It's usually located next to the blower. It will have electrical wires connected to it. High speed bypasses the block so it alway works.
If you want to replace it then;
) Disconnect the battery negative terminal if the vehicle have air bags. Wait 2 minutes for system to discharge.
) Remove the kick block on the passenger side. )Remve the glove box ) Remove the bolts holding the blower motor resistor. Push the red lock up and press down on the click ) Pull the block out. ) Install new block and reverse steps above.
Not finding what you are looking for?

1,576 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...