Cars & Trucks Logo

Related Topics:

2002 ford windstar data link connecter wont let me scan///all fuses r fine

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Apr 14, 2009

SOURCE: power locks do not work for my ford windstar 2002

check fuse 37, a 20 amp yellow fuse in the interior fuse box, if that checks ok the problem is with the electronic module that controls the locks, it is called the GEM module.

Ad

Anonymous

  • 83 Answers
  • Posted on Jul 26, 2009

SOURCE: 2002 ford windstar lx front passenger window does not work.

Turn on interior lamps and watch lamps while working switch, if lamps dim and no noise is heard in door ( like crunching sound) you need to replace window motor, if noise is heard you have a failed window regulator.Lights do not dim you may have a bad switch. You can also try to hit in center of door panel to see if window will start working which also means bad motor. Hope this helps.

fingaz22

michael schultz

  • 1068 Answers
  • Posted on Jan 28, 2010

SOURCE: 2002 Ford Windstar Error Code P1131 And P1151

those two codes are for the o2 sensors. both are the upstream sensors on the front and rear banks. so they are desinagted bank 1 sensor 1 and bank 2 sensor 1. them most common cause for this is faulty o2sensors , bad gas and of a poor running engine. so if your car runs good (no misfire) and gas is ok then replace the o2sensor witch is the very most common cause.

Testimonial: " Help With Problem But Where Are These O2 Sensor"

roniecon

Ronny Bennett Sr.

  • 6988 Answers
  • Posted on Apr 16, 2010

SOURCE: heat & a/c stopped working wont blow any air

Check the blower motor relay next to the blower motor,it could be a blower module,but it is the problem.

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Feb 08, 2012

SOURCE: my 2002 subaru wrx obd2 link wont connect to scanner , is there a fuse i dont see on listed

It is most often the same fuse as the cigar lighter or power points. Use a 12 volt test light and check the terminal listed in the diagram below for power.
2_8_2012_6_40_04_pm.gif

Testimonial: "thank you i got the codes "

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Our 2002 fordwind star back up lights dont work

Check fuse F2.7 15amp located in the (CJB) central junction box , this is the fuse box inside the vehicle . This fuse supply's B+ voltage directly to the back up lights . Now is were it gets complicated , the lights are connected to the (REM) rear electronic module ,which will supply a ground when commanded too. The (REM) is connected to the SCP - it's a serial data network that all the electronic modules on your vehicle talk an share info. The PCM - engine computer receives inputs from the transmission range sensor switch as to what gear the vehicle is in . This info is sent out on the data bus so which ever module uses it can . When you put the vehicle in reverse the PCM sees this an sends a message to the (REM) to turn on the back up lights !
010 Ford SCP Communications
1helpful
1answer

Transnission troubles 2002 Windstari

Buster, check the transmission fluid level, if level OK it is something wrong internal of transmission,torque converter,pump,shaft splines stripped,etc. Take into a good shop for diagnosis and estimate to repair/replace.Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Windstar transmission problem
windstar transmission
2003 windstar transmission wont move into any gear

0helpful
1answer

2002 ford windstar first wouldnt start, jumped and started, drove 200 miles and turn

You need to have the factory security system scanned, it is most likely locking you out due to a fault.
0helpful
2answers

Diagram of fuse box on 02 windstar

For 2002 ford fuse box diagram.Click the link below:--- http://howtobyme.blogspot.com/2011/10/fuse-box-diagram-for-2002-ford-windstar.html -------- This will help.Thanks.Helpmech.
0helpful
1answer

I have a 02 ford windstar. 3.8L does not start or do anything, Has a brand new Battery about a month ago Checked all fuses and they all have power. When you turn the key to start nothing happens, no...

A few things I can think of are the starting circuit of the ignition switch, the neutral saftey switch, the starter solenoid, a fusible link, and a bad connection.
0helpful
1answer

Ok i have a 01 ford windstar the cig. lighter caught on fire. replaced fuse now it and to obd doesnt work. really need obd it is running like u know what. dont know why??

When your lighter lit on fire it could have melted the casings on the wires shorting them together. This would cause the fuse to blow every time you use the lighter. Also it is the same fuse for both the lighter and obd (which in your owners manual will be called Data Link Connector, or DLC). Replace the fuse but don't use the lighter. When you plug in the DLC it should work just fine then try the lighter. If fuse blows you have to fix the wiring to the lighter or possibly the lighter socket.
0helpful
2answers

No connection of OBD port

What do you mean it wont connect, it plugs in right?
it wont power up???? I'll bet the cigarette lighter is also dead, replace the lighter fuse
0helpful
1answer

Which is the fuse for the heater on a 2002 Ford Windstar

i can look this upbut it is in your owner manual and should be on the back of the fuse access panel. You have fuses inside the van and some haevy duty fuses & relays under the hood.
0helpful
1answer

99 ford windstar wont start

Check all your fuses under the hood and under the dash on the driver side
Not finding what you are looking for?

97 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...