Question about Infiniti Cars & Trucks

Open Question

How do I remove the airbag module under the center console in a Infiniti G37x coupe 2009? Thanks

Posted by Alain Prieto on

Ad

5 Related Answers

Anonymous

  • 43 Answers

SOURCE: How to remove jammed cd infiniti g35 coupe

This is a stereo we see in shop for repair on a regular basis, see www.carstereohelp.com for repair. However, I have one suggestion before thinking of repair. Disconnect one of the main car battery terminals for several minutes. This is much easier then removing and reinstalling the stereo in this car. This may act as a reset and bring the changer back. Otherwise, repair is needed.

Posted on Nov 13, 2008

Ad

Anonymous

  • 55 Answers

SOURCE: blinking airbag dashlight Nissan Versa

First, turn on your car (ON key position) and your airbag light stays on for 7 seconds, then starts flashing every half second. (.5 seconds on, .5 seconds off, repeat)
This means either your airbag is malfunctioning, or it malfunctioned in the past. We'll find out exactly what happened in a second.

If your airbag light is on solid the whole time, either your airbag has deployed, the computer thinks its deployed, or your sensor or wire harness is broken. You're going to need a professional to fix this.

If your light never comes on at all, your METER fuse might be blown, or you might have a wiring fault in an airbag circuit. Go directly to Infiniti and have a professional fix this.

OK, so your light is flashing like I explained before. Next, we're going to enter DIAGNOSIS mode. This mode will tell you exactly what’s wrong with your airbag (according to the computer at least) It's a bit tricky, but read carefully.

1. Turn ignition switch “ON”.
2. After “AIR BAG” warning lamp lights for 7 seconds, [i.e. when it stops running solid and starts flashing] turn ignition switch “OFF” within 1 second. [DO NOT SWITCH IT TO LOCK, SWITCH IT TO ACC]
3. Wait more than 3 seconds.
4. Repeat steps 1 to 3 two times. (Perform 3 times in total.)
5. Turn ignition switch “ON”.
SRS is now in Diagnosis mode.

Try it a few times. If you can't get it to work, have someone else try. If you STILL can't get it to work, check your battery voltage. It might be low.

In diagnosis mode, you're going to hope the light flashes slowly. 2 seconds off, 3 seconds on, and repeats. If your light does this, this means that the computer detected a previous error that hasn't been erased. This is good.

If you get ANY OTHER result, go directly to Infiniti. You've got a real problem that needs a real fix.

Now, to erase the error from memory.

5. If “AIR BAG” warning lamp operates as [as I said before], turn ignition switch “OFF” to reset from Diagnosis mode
to User mode and to erase the memory of the malfunction.

6. Turn ignition switch “ON”. “AIR BAG” warning lamp operates in
User mode. [it should stay on for 7 seconds, then go off, like normal.]

Hope this helps you.

Posted on Jan 11, 2009

Ad

Anonymous

  • 740 Answers

SOURCE: 1997 Acura TL Airbag Control Module removal

First of all removing of radio will definitely give you alot more room. (rememeber you will nee radio code after you unplug radio) I would recommend that you disconnect battery before you EVER work on air bags. This module is pretty simple to remove but it is help by Special TORX screws. after removal of screw it its a yellow latch to pull across and unplug. Good luck thanks for using FIX YA

Posted on Jan 14, 2009

Anonymous

  • 2 Answers

SOURCE: How to remove center console or where to get the diagram? Thanks Tony

In my 2004 Sierra the console is held in by the seat bolts. You will need a star 16 and 20 to get the seats out. There are 2 bolts that go into the dashboard also. There is a big electrical connection under the console that needs to be unplugged to get it out.

Posted on May 23, 2009

Anonymous

  • 8 Answers

SOURCE: How to remove the center console on a 1992 600SEL?

here is a place you can get a free online manual for your car!

maybe it will show where they hide the screws!

http://www.onlinefreeebooks.net/automotive-machinery-power-equipment-ebooks/mercedes-benz/1992-mercedes-benz-600sel-operators-manual-pdf.html

Jon V.

Posted on Jun 21, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi were is the air filter cabine on g37x 2009? Thanks


Open the glove box 3 screws along the top three screws on the bottom one screw in the middle back of the club box and pull out the glove box complete and the filters right there

Jul 10, 2018 | 2009 Infiniti G37

2 Answers

I have a 2007 silverado classic crew cab. The airbag ecu or airbag module needs to be replaced i need to know where it is located. code b1000


Oney, I think the airbag ECU is under the drivers seat, under carpet
or could be under center console if equipped. Seat or console will have to be removed to access. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
GM recalls 330 000 fullsize trucks for airbag replacement
DIY How To Installation Airbag Module Reset Overhead Consoles Speedometer...
New Recall 09184 07 09 Silverado Sierra Truck Forum Truck Mod Central

May 26, 2016 | Chevrolet Cars & Trucks

1 Answer

93 saturn sc2, if airbag light comes on, won't start back up


Have you spilled anything onto the center console? Your air bag computer (SIR module) is under the center console as well as another module called the QDM you could have some corrosion build up on the connectors of those modules. You will have to remove the center console to see them. Other than that I am thinking possible ignition switch problem. Ignition switches can cause funky problems that crop up in multiple electrical systems.

Nov 10, 2013 | Saturn SC2 Cars & Trucks

1 Answer

Were is the airbag module


The SDM is Sensing and Diagnostic Module which is supposed to be located under the center console area.

Jan 12, 2011 | 2009 Pontiac G6

1 Answer

2005 honda crv airbag module location


Most of the time it's in the middle of the car under the center consol(consol with stereo) , SRS module usually mounted on the floor.

May 27, 2010 | 2005 Honda CR-V

1 Answer

Needing to locate the airbag control module '07 caliber


it is located behind the floor shifter in center console..under small piece of carpet

Jun 16, 2009 | 2007 Dodge Caliber SXT Sport Hatchback

2 Answers

Airbag module removal


These module are normally in the centre of the car under the centre console Make sure you disconnect the battery first if you need help on the location of the unit give us a call on 07923 479640 thanks svs

Jun 13, 2009 | 2003 Volkswagen New Beetle Convertible

1 Answer

1997 Acura TL Airbag Control Module removal


First of all removing of radio will definitely give you alot more room. (rememeber you will nee radio code after you unplug radio) I would recommend that you disconnect battery before you EVER work on air bags. This module is pretty simple to remove but it is help by Special TORX screws. after removal of screw it its a yellow latch to pull across and unplug. Good luck thanks for using FIX YA

Jan 11, 2009 | 1997 Acura TL Series

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6528 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...