Torque Specs for mains;Con rod ; fly wheel and Head bolts
Some lady helped me get manual instantly from
www.reliable-store.com thanks.
best site for this
SOURCE: torque specs for toyota tercel
Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using FixYa. Roger
SOURCE: torque specs for 1998 tercel 1.5L
Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.
Hope this helps
SOURCE: mazda 2000 B2500 main, rod+cil head bolt torque
call your local auto zone-they can give them to you
SOURCE: TORQUE SPECS. FOR '81 JEEP 258 C.I.D.
Check this web page and double check to make sure that I entered in all the correct information. *** http://www.torkspec.com/torkspecme.aspx?KI=69-4.2L-258ci-S6
You can find just about all of the torque specs that you should need here. Also you might want to order yourself a Chilton manual. They usually have all of the specs in the back of the book and throughout the different sections.
1,401 views
Usually answered in minutes!
×