98 Toyota Avalon 3.0....wont start...NO sound....Lights & gages work when key engaged...

SOURCE: toyota avalon 2001 starting problem(transponder

Sure, I would sell you the same parts, IF I was interested in robbing you, BUT, I have no interest in having dissatisfied customers...So, here is what I need you to do: Call this number: 1-877-517-LOCK
This is my local locksmith,and he is cool...Tell them that I gave you this number. He has a machine, on his truck, that will reprogram your key to match the ECU/barrel combo in your car. Now, I do not expect you to have him come to your location, but, he may give you the info that HE has, his machine, and then you could call local locksmiths to see if they have the same gizmo that he has, to solve your problem. Secondly, there is an ECU exchange program from Toyota, that your dealer ssomehow neglected to tell you about, but it would cost you about 700.00 to get you going. Call the locksmiths first, and get back to me if my guy won't help you. This is the best that I can do, up to this point. Hope this helps. Advise of what transpires.

SOURCE: program a replacement key for a toyota avalon 2005

programyourremote.com

SOURCE: Key won't turn in ignition, 2001 Toyota 4Runner

I have the same problem. I put some graphite down the key hole and pushed it around in there and it loosened it up a bit to the point I could turn the ignition. If you have a replacement key, start using that. It should help as well.Teeth on old key may be wearing down. Lastly, I keep a screwdriver in the car to whack against key when it's in the ignition if it's stuck. A few taps on the key will always unlock the ignition.

Or, go but a new ignition and key set....

SOURCE: I have a 2000 toyota avalon ignition problems

Hello I have simular problem the ignition on is stuck in that position with the key turned off and out of the ignition switch.It feels like the key switch is spinning freely in the ignition. Do I need an ignition switch?

SOURCE: the key is in the

Your steering locks could be in a bind. Is your steering wheel turned to the side? Try moving the steering wheel while trying to turn the key. If this is not the case, then you most likely have either a worn-out key or a worn-out ignition lock cylinder assembly.
I would first try a different key if you have one. If there is not another key, I would take the Vehicle Identification Number (VIN) to the dealer along with proof of registration and picture ID, and have them cut a NEW key using the key codes for your vehicle. If this does not work, then you will probably have to replace the ignition lock cylinder assembly.